How do you replace the spout on a Kohler kitchen faucet?
Twist the bonnet, the decorative covering beneath the handle, counterclockwise to remove and expose the valve and mounting nut (Fig. 3) and (Fig. 4). 6. Grasp toward the base of the faucet and the spout and pull straight up to remove the spout. 7.
How to replace seals on a single control kitchen faucet?
Replace Seals on a Single-Control Kitchen Faucet. Turn off the water supply to your kitchen faucet. Remove the plug button located on the back of the handle (Fig. 1). Loosen the small screw beneath the button using a hex wrench ( Fig. 2). Remove the handle. Twist the bonnet, the decorative covering beneath the handle,…
How do you turn off a kitchen faucet?
Turn off the water supply to your kitchen faucet. 2. Remove the plug button located on the back of the handle (Fig. 1). 3. Loosen the small screw beneath the button using a hex wrench ( Fig. 2). 4. Remove the handle. 5.
How do you remove the handle from a water faucet?
Loosen the small screw beneath the button using a hex wrench ( Fig. 2). 4. Remove the handle. 5. Twist the bonnet, the decorative covering beneath the handle, counterclockwise to remove and expose the valve and mounting nut (Fig. 3) and (Fig. 4). 6. Grasp toward the base of the faucet and the spout and pull straight up to remove the spout. 7.
How do you replace a handle on a Kohler faucet?
Install the new valve by screwing it back into the faucet, turning clockwise. Tighten the valve with the wrench to 1/8 to 1/4 turn past hand tight. Before reassembling the handle, turn the water back on to check for leaks. Once you have made sure there are no leaks, reassemble the remaining parts. Fig. 1 Fig. 2 Fig. 3 Fig. 4
Replace Seals on a Single-Control Kitchen Faucet. Turn off the water supply to your kitchen faucet. Remove the plug button located on the back of the handle (Fig. 1). Loosen the small screw beneath the button using a hex wrench ( Fig. 2). Remove the handle. Twist the bonnet, the decorative covering beneath the handle,…
How do you install a new water faucet?
Install the new valve by screwing it back into the faucet, turning clockwise. Tighten the valve with the wrench to 1/8 to 1/4 turn past hand tight. Before reassembling the handle, turn the water back on to check for leaks.
How do you remove the handle from a knob faucet?
On knob style faucets, a plug button covers the screw to remove the handle. With the handle removed, the top of the valve will be visible (Fig. 2).
