How do you replace Jets in a Cal spa?
To replace jets, insert the jet in the jet well and push and rotate it clockwise until you feel it snap into position. When the jet face can be rotated freely, it is properly seated. Cal Spas are designed with your complete relaxation and enjoyment in mind.
When did Cal spas start making hot tubs?
Cal Spas was founded in 1979, and they currently offer more than 250 product models. Each of their hot tubs can be customized from a list of thousands of options, and the company places an emphasis on innovative touches and quality workmanship.
What should I do if my spa jets are not working?
Check to see if the new jets work. Refill the water in your home spa or turn on your bathtub. Turn on your new jets. If they do not work properly, try the installation process again. There may be a problem with the home spa if the jets still do not work properly after inspection and re-installation.
When to rotate a jet face without unscrewing it?
When the jet face can be rotated about 1/2 turn without unscrewing the jet, it is properly in place. Do not overtighten. Rotate the jet face counterclockwise until you feel some resistance.
To replace jets, insert the jet in the jet well and push and rotate it clockwise until you feel it snap into position. When the jet face can be rotated freely, it is properly seated. Cal Spas are designed with your complete relaxation and enjoyment in mind.
How to troubleshoot a problem with a Cal spa?
Troubleshooting 1 Message on the control panel. A message on the control panel may indicate a problem. 2 Problems starting up. Note: The priming procedure described here applies to Cal Spas built in 2013 and earlier. 3 Power and electrical problems. 4 Heat problems 5 Jet problems 6 Water pressure problems
When the jet face can be rotated about 1/2 turn without unscrewing the jet, it is properly in place. Do not overtighten. Rotate the jet face counterclockwise until you feel some resistance.
Can you replace a spa with a hot tub?
“I replaced a spa and went with Cal Spas. Dealing with their customer service was pleasant and easy. I literally pulled up the freeway, walked-in and made a deal. The hot tub had to go in an existing hole in the ground, so Cal Spas connected me with a carpenter that came.
