How do you remove Aqua Magic toilet?
Disconnect the fresh water supply line and lift toilet straight up. For Aqua-Magic IV, disconnect the water supply line from the water valve located on the rear of the toilet. Remove the nuts from the closet flange bolts located on each side of the toilet. Carefully lift and remove the toilet from the closet flange.
What is the lightest weight toilet?
Most bowls weigh between 50 and 60 pounds alone. The tank, which attaches to the backside of the toilet, is the lightest component. It usually only tips the scales at about a third of the toilet’s final weight. Depending on the design of the fixture, this is usually somewhere between 25 and 40 pounds.
How to fix an Aqua Magic RV toilet?
Replace The Water Valve On A Thetford Aqua Magic V RV Toilet Face the toilet away from you so you have easy access to the back Using a Philips screwdriver remove the retaining screw Pull off the flush tube off of the water module Lift the locking tab and slide out of the groove Lift up on the metal …
Is there a replacement for the Thetford Aqua Magic?
I know in the future I will never own another one of their RV toilets. This purchase was a replacement for an r-pod model 171 toilet. The Thetford aqua magic broke just above the threaded male end connected to the water supply line. The replacement works flawlessly.
Why did my Thetford Aqua Magic toilet break?
The stiff pex plastic line was putting pressure on the valve so I cut the line shorter, added a shut-off valve and connected with a flexible faucet supply line. This purchase was a replacement for an r-pod model 171 toilet. The Thetford aqua magic broke just above the threaded male end connected to the water supply line.
How old is Aqua Magic bravura RV toilet?
Replacing non functional 20 year old ThetFord aqua magic in 1999 Xplorer class B motor home. Getting old one out was a bear, due to hard to access mounting bolts. But installation was pretty simple. I did need to instal an elbow since the water feed is at a different location and angle than old one.
How to remove an Aqua Magic SL toilet?
Flush the toilet to empty water from the bowl and remove remaining water pressure. Disconnect the water line from the water valve/elbow. Loosen the two nuts at the base of the toilet. Lift the toilet from the floor. Remove the closet flange seal.
How does the Aqua Magic V toilet work?
Made of plastic, Aqua-Magic V is lightweight and easy-to-use. The textured lid is designed to shed water and resist scuffs, while the pedal flush acts as a dual system: pressing the handle half way adds water to the bowl, while pressing it all the way opens the valve and flushes the toilet.
How big is an Aqua Magic hand flush toilet?
To further reduce the water consumption of your toilet, Aqua-Magic V can be fitted with a water-saving hand sprayer, ideal for a hand rinse wash down of the bowl, is available in high profile – white color, comes with closet flange bolts, nuts, and flange seal, and has the following dimensions: W: 15-1/8 in (38.4 cm) – bowl size from side to side.
What are the features of the Aqua Magic V?
The Aqua-Magic V comes in white or bone, high or low profiles to fit your specific design and space requirements. Other features include: Maximize cleanliness with our powerful full-bowl flush coverage. Complete with a textured lid that sheds water and resists scuffs.
