How do you relieve pressure on Pentair SuperFlo?
Turn off all power to the pump. IMPORTANT: Place filter manual air relief valve in the open position and wait for all pressure in the system to be relieved.
How does the ERR 0002 work on a Pentair Superflo?
The Err 0002 will prevent the pump from running until you clear the blockage. So, if the pump is on, hit the start/stop button to turn it off. There are two ways to clear the blockage. The method I always use is to remove the pump lid and pump basket, then I spin the impeller with a screwdriver.
Why does my Pentair pump have an err code of 0002?
The screen will display an error code as Err and then display a number. The most common one is the Err 0002 and it is usually caused by the impeller getting clogged and the pump is unable to prime. It is probably a built-in failsafe so that the pump doesn’t overheat and become damaged.
Why is my Pentair Superflo pump not primed?
The most common one is the Err 0002 and it is usually caused by the impeller getting clogged and the pump is unable to prime. It is probably a built-in failsafe so that the pump doesn’t overheat and become damaged. The Err 0002 will prevent the pump from running until you clear the blockage.
Is there an error code on the Superflo vs?
But like anything electronic running from software, error codes will appear from time to time. If you see that your SuperFlo VS is not running as scheduled, flip open the top and see if there is an error code of some kind. The screen will display an error code as Err and then display a number.
The Err 0002 will prevent the pump from running until you clear the blockage. So, if the pump is on, hit the start/stop button to turn it off. There are two ways to clear the blockage. The method I always use is to remove the pump lid and pump basket, then I spin the impeller with a screwdriver.
The screen will display an error code as Err and then display a number. The most common one is the Err 0002 and it is usually caused by the impeller getting clogged and the pump is unable to prime. It is probably a built-in failsafe so that the pump doesn’t overheat and become damaged.
The most common one is the Err 0002 and it is usually caused by the impeller getting clogged and the pump is unable to prime. It is probably a built-in failsafe so that the pump doesn’t overheat and become damaged. The Err 0002 will prevent the pump from running until you clear the blockage.
What does 0f mean on a Pentair pump?
See page 14 “Pump Disassembly” for instructions for disassembling the pump. 0F – Absolute AC Under-Voltage Detected: This indicates that the supply voltage has dropped below the operating range of 99v. This could be caused by normal voltage variation and will clear itself.
