How do you recalibrate Hayward Aqua Plus?

With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.

How do I reset my Hayward Swimpure?

If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.

How to troubleshoot your Hayward Aqua rite salt system?

Troubleshooting and diagnosing their problems. If you’re reading this blog that means you need help troubleshooting your Hayward Aqua Rite salt system. Well, the good news is you are at the right spot and you’re definitely not alone. This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward.

Where can I find the Aqua rite diagnostics manual?

How to set Turbo cell size on Hayward Aqua rite?

How To Set Your Turbo Cell Size Slide your main switch to the AUTO position. Switch your cell type by cycling the main switch from AUTO to SUPER CHLORINATE and then back to AUTO. Push the diagnostic button until “T-XX” appears on the display.

What are the dangers of Aqua rite XL?

Aqua Rite/Aqua Rite XL Diagnostics High Voltage Electrocution Hazard Hazardous voltage can shock, burn, cause serious injury and or death.

Where is the diagnostic button on Hayward Aqua rite?

Solution: Slide the Main Switch to the “Auto” position (directly under Super Chlorinate). To set the Cell Type, toggle the Main Switch from Auto to Super Chlorinate, and back to Auto. Now, push the Diagnostic button until your cell-type appears on the display (“t-xx”).