How do you purge a Bullfrog spa?
First, turn off the power at the breaker. Next, locate the drain. On most Bullfrog Spas, the drain is located on the right side of the spa base below the equipment compartment door. Pull the drain out with a slight clockwise turn, then remove the drain cap.
What order do I add hot tub chemicals?
Mix dry granular or powdered chemicals into a bucket of spa water to dilute them, and then add the contents of the bucket to the spa.
- Avoid splashing chemicals by adding the chemicals to the water rather than water to the chemicals.
- Do not mix the chemicals with each other before adding them to the hot tub.
What to do if your Bullfrog hot tub is not working?
Adjust water to the water level indication mark on the faceplate of the filter assembly. Next, check your filters as they may be dirty. If so, clean or replace them. If your spa’s jets seem weak or are not working, first double-check to make sure that the valves are open.
How to remove mildew from a bullfrog hot tub?
To remove mildew, prepare a mild solution of 1/2 cup of bleach and a tablespoon of mild soap in a gallon of water. Spray the area thoroughly and allow to soak in. Wipe away with a clean cloth. Rinse thoroughly and allow to air dry. At least monthly, clean the spa cover following the directions below.
What to do about hard water stains in a bullfrog spa?
To clean hard water stains, remove light scratches and protect your spa shell, contact your authorized Bullfrog Spa dealer. With normal use of the spa, oils, lotions, and hair spray will build up on the surface of the water. This can leave a residue line around the perimeter.
How do I know it’s time to change my hot tub water?
There are several methods to trigger the decision to change out hot tub water. 1.Use A Little Science: One of the key indicators that it’s getting time to change out your hot tub water is the “total dissolved solids” (TDS) reading. TDS is pretty much as it sounds it measures everything that is dissolved in the water.
Where can I buy a bullfrog hot tub?
Your local authorized Bullfrog Spa dealer will help you purchase, install, and service your hot tub. Design Studio allows you to choose the spa model and layout you want, the JetPaks you need, and the colors that complement your home and landscape. Design the best hot tub for you and your needs. Still Have Questions?
How to clean hard water stains on a bullfrog hot tub?
To clean hard water stains, remove light scratches and protect your spa shell, contact your authorized Bullfrog Spa dealer. With normal use of the spa, oils, lotions, and hair spray will build up on the surface of the water. This can leave a residue line around the perimeter. This can be easily removed using a spa surface cleaner or its equivalent.
How to prevent airlocks in a bullfrog hot tub?
To prevent airlocks when filling your spa, be sure to open all valves in the JetPaks and all other jets in the spa before filling to allow as much air as possible to escape from the system during the filling process. Fill your spa through the filter by taking the filter cap off and put the hose directly in the filter.
How often should I de Grease my Bullfrog hot tub?
Every 3 to 6 weeks, depending on frequency of use and number of bathers, spray the filter off with a high-pressure garden hose attachment. Depending on use, a de-greaser or de-scaler is recommended every 4-6 months. Refer to the owner’s manual. How do I maintain my spa cover?
