How do you properly drain a pool?

How do you properly drain a pool?

How to Drain A Pool with a Cartridge Filter

1. Shut off the pump.
2. Go to the back of the filter and unscrew the drain plug.
3. Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
4. Turn the pump back off and put the plug back into the drain plug.

How do you winterize an inground pool step by step?

10 Steps – How to Winterize an In Ground Pool

1. Remove ladders and accessories.
2. Balance your water chemistry.
3. Clean the pool.
4. Lower the water level.
5. Turn off the system components.
6. Add your winter closing kit chemicals.
7. Drain water from pump and filter.
8. Blow out the water lines.

How do you drain and clean a inground pool?

How to Drain an Inground Pool

1. Rent or buy a submersible pump.
2. Monitor the Draining Process.
3. Turn Off and Remove the Submersible Pump.
4. Open a Hydrostatic Pressure Relief Valve.
5. Perform the Work You Drained the Pool For.
6. Replace the Hydrostatic Pressure Relief Valve.
7. Refill the Pool.
8. Turn on the Pool Pump.

How do I open my inground pool?

How to Open Your Inground Swimming Pool

1. Get the Gunk Off Your Pool Cover.
2. Whisk Away the Winter Pool Cover.
3. Clean and Store Your Pool Cover.
4. Skim the Pool.
5. Remove Plugs and Ice Compensator.
6. Reinstall the Chutes and Ladders.
7. Just Add Water.
8. Set up and Run Your Filter and Pump.

What do you need to drain an inground pool?

Find a Sump Pump In order to remove the water from the pool, you will need to get a submersible pump (also known as a sump pump). A sump pump can actually be placed completely underwater and will pump the water out through a hose. You will need to make sure that you have a big enough sump pump and hose for the job.

How do you pump water out of a pool?

Pump Out the Water Hook up the sump pump to the hose and drop it down in the pool. Run the hose into the sewer drain and the water will be pumped out of the pool and into the sewer.

How big of a pump do I need to drain my Pool?

After that, you can just leave the pool to pump itself. Eventually, the pool will drain until there’s only 6 inches of water left. From there, the regular pump won’t be able to take water out anymore. For that purpose, you need to use a small cover pump to drain out the remaining water.

Can a cover pump be used to drain a pool?

From there, the regular pump won’t be able to take water out anymore. For that purpose, you need to use a small cover pump to drain out the remaining water. Those are the steps to drain your pool if your skimmer valve and the main drain are separated.

What will happen if you drain an inground pool?

The first thing to take note of is that pool draining is dangerous depending on the material of your pool. You see, when you drain your pool, it will face hydrostatic pressure which will push some force on the pool wall and floor. This force will damage your pool walls.

How often should you drain your in-ground pool?

• especially if you have a fiberglass pool.
• use a hose to spray them down as the water lowers.
• Don’t drain your pool after heavy rains or storms.
• Don’t drain your pool in cold temperatures that range from 55 to 85 degrees Fahrenheit.

  How do you drain an inground swimming pool?

  An inground swimming pool’s main drain is located in the deep end of the pool. A main drain circulates the pool’s water by pulling water off the bottom of the pool and sending it to the filter. During winter months or periods of non-use, most pool drains do not need to be plugged, but in some cases plugging a main drain is required or recommended.

  What to do with an inground pool?

  Fill the area with dirt and pack it down to prevent a cave-in. Once the hole is completely filled with soil, cover it with grass or landscape with plants and flowers. It’s important to note that filling in your swimming pool may significantly lower your property value.