How do you programming colorlogic Pro Logic Control?
Programming the ColorLogic lights takes place within the Settings Menu of the Pro Logic control. To enter the Settings Menu, push the “Menu” button until “Settings” is displayed. Push the “<” or “>” buttons until the desired Aux is displayed then follow the sequence described on the following pages. Light Show Programming
What should I do if my Pool Light is not working?
A junction box is the point at which multiple electrical device cables can be joined to one main line. Not all applications utilize a junction so this step may not apply. If the junction reads 0 then the mainline leading to box is malfunctioning. Have an electrician inspect and install a new main line from box to breaker.
What’s the problem with my colorlogic pool lights?
My pool has two colorlogic lights both wired to a single transformer box recently when I turn them on one will not light up for about an hour then it comes on. Any suggestions on what the problem could be? Hi! That is an interesting problem. Makes me wonder how old the lights are. I al so have a PM into someone that might know the answer.
What can Prologic do for a Hayward pool?
Pool owners can automate all work intensive functions such as filtration, heating, sanitization, balancing PH, and cleaning. ProLogic is offered in three different models for the right level of control to suit pool owner’s needs. Thanks for reading! We hope this helped you solve your Hayward needs.
How can I Turn On my Pool Light?
Turning Your Lights On and Off Much like any other light in your home, the most common way to control your pool light is with the use of a traditional ON/OFF switch. You can simply flip the switch up or down to turn on or off your pool light. Sometimes though, the most difficult part is finding the correct switch.
Is there a remote control for a pool light?
The Pure Colors LED bulb and Pentair Amerlite fixture kit combines the PureLine LED bulb with the Pentair Amerlite Light Fixture. Pool owners still have the option to purchase the kit with or without the RF Remote control. This fixture kit is also ideal for pool owners who have trouble identifying which pool light they own.
How to turn off flow control on ProLogic?
Press the Menu button repeatedly, until the Diagnostic Menu appears. Then press (>) one time. If all zeros or if Chlorinator Off Percentage Met, press \~+ key. IF, after a short countdown delay, the display does not revert to zeros, refer to step 3.
What to do when your pool light overloads?
To perform the latter, we will unplug any appliance that may have immediately caused the overload. Next, we will reset the breaker at the box. When a breaker is tripped, it flips to an idle position and will not resume current flow until it is completely reset by hand.
