How do you prime a Viking spa?

How do you prime a Viking spa?

How to Prime a Hot Tub Pump

1. Shut down the hot tub. Turn off the power at the wall.
2. Take the handle off the massage selector that’s supplied by the pump you need to prime. Many hot tubs have more than one pump.
3. Turn the massage selector cap clockwise to tighten it when the hissing stops. Turn it finger tight.

What kind of power do you need for a Viking spa?

• Your 110-volt or 220-volt spa pack is designed to be “PERMANENTLY CONNECTED”. • It is the customer’s responsibility to acquire necessary permits and to arrange for installation and hook up of the electrical power. NOTE: Do not put your spa on any soft surface such as sand, grass, crushed rock or dirt.

Why is there no power in my hot tub?

Consult an electrician to find the source, if not readily apparent (burnt wires, water, insects or rodent damage, etc.). Some spas and hot tubs have internal fuses, which are meant to blow when voltage spikes occur. These fuses protect your spa equipment, including pumps, blowers and heaters.

How do you turn off the light on a Viking spa?

Light. Press the “Light” button to turn the light on and off. If left on, the light automatically turns off after 4 hours. In spas equipped with LED light, press the light button consecutively to change the color sequencing. Mode. The mode is changed by pressing the “Temp” button, then pressing the “Light” button.

Do you have to open gate on Viking spa?

It is very important to make sure that the spa is filled at least 3/4 way up the skimmer opening. Make sure the gate valves are in the open or up position. WARNING: Do not run spa with gate valves closed or run pump with no water circulating in spa for long periods.

How many Viking hot tubs does Viking Spa have?

The Viking Spa Company is an original hot tub company that is a family run. The Viking Spas line consists of eight molds that can be made up in three different ways to hit each price range and hydrotherapy need. This limited line of tubs makes it easier for Viking Spas to stay competitive and keep up their quality.

Consult an electrician to find the source, if not readily apparent (burnt wires, water, insects or rodent damage, etc.). Some spas and hot tubs have internal fuses, which are meant to blow when voltage spikes occur. These fuses protect your spa equipment, including pumps, blowers and heaters.

Light. Press the “Light” button to turn the light on and off. If left on, the light automatically turns off after 4 hours. In spas equipped with LED light, press the light button consecutively to change the color sequencing. Mode. The mode is changed by pressing the “Temp” button, then pressing the “Light” button.

It is very important to make sure that the spa is filled at least 3/4 way up the skimmer opening. Make sure the gate valves are in the open or up position. WARNING: Do not run spa with gate valves closed or run pump with no water circulating in spa for long periods.