How do you plumb a thermostatic shower?
- Decide where to take the hot and water supplies from.
- Isolate the supply.
- Run the pipework towards the shower.
- Flush the pipework through to remove any dirt.
- Work out how much outlet pipe is required.
- Cut the outlet pipes.
- Drill the holes.
- Place a collapsible olive into each inlet.
How do you install a shower mixer diverter?
Wet the faceplate body and diverter seal. Slide plate onto mixer body and position with notch in plate towards the bottom. Push handle on to cartridge pin, tighten grub screw firmly with hex key provided and cap the grub screw hole with the chrome cover. IMPORTANT: Before you begin, turn off the water supply.
How to install a thermostatic shower mixer in your home?
Install a thermostatic shower mixer. 1 Preparation. Turn off the water supply before dismantling your old unit. 1 – If major work is done on the home, the water network must be flushed of 2 Preparation. 3 Installing the thermostatic mixer. 4 Adjusting the thermostatic mixer. 5 Connecting the shower hose.
How to dismantle an old shower thermostatic?
Turn off the water supply before dismantling your old unit. 1 – If major work is done on the home, the water network must be flushed of all impurities to avoid damaging your mixer. 2 – Before dismantling your old unit, make sure the hot water feed is on the left, and that the cold water feed is on the right.
Where can I find the thermostatic shower valve?
If you are fitting the thermostatic shower valve into a shower enclosure you can tee into the closest hot and cold pipes, which are often found under floorboards or hidden in a cupboard. You can check which is which by tracing the pipes back from the nearest hot and cold taps. The flow of water can be felt through the pipe with the tap running.
What is thermostatic shower system?
The thermostatic shower is a popular device utilizing a memory allowing you to maintain the desired temperature of the shower, even between uses. Thermostatic showers are mechanized in order to give the user better control over how the shower behaves.
What is a mixer shower?
A mixer shower is one of the most traditional types of showers out there. They will blend hot and cold water to the right temperature and deliver it through the shower head. The majority of mixer showers have a wall-mounted temperature control, as well as pipes that are hidden in the wall, behind the tiles.
What is a thermostatic shower valve?
A thermostatic shower valve is a type of mixing valve which can be essential when it comes to bathroom plumbing. For example, if a person is using the shower and a toilet is flushed or another faucet is turned on, the water temperature could change dramatically.
What is a temperature control shower valve?
The most common type of temperature control valves in the household shower. The valve maintains shower temperature by ensuring that the ratio of hot water to cold water stays constant. The valve (more info) utilizes a piston or diaphragm with ball-bearings that responds to changes in the pressure of the hot and cold water pipes.
