How do you measure a Lippert solid step?
How to measure for Solid Step
- Measure the height from the ground to your entry door threshold. 22”-28” = Solid Step Premium Double.
- Measure inside edge to inside edge of your entry door frame — rounding up to the nearest even number. This will determine if you need the 26” or 30” Solid Step assembly.
Why are my steps won’t retract?
Thanks for the offer but we’ll be in Indiana that weekend. I will be at the Six State rally in MO. the week before. It did turn out to be the magnetic switch that caused the problem. I took a magnet out of one of my screw drivers and inserted it in the plastic housing and stuffed it full of paper to wedge the magnet toward the sensor.
What to do if your front door lock wont retract?
How to fix a stuck front door lock latch that won’t retract. Now go to the hardware store and buy you a new dead latch. If the method above didn’t work, then there is one last thing you can do before taking the door off of the hinges. Take a 2 liter coke bottle and cut out a strip about 2 inches wide and 4 inches long.
Why is My Step not working on my RV?
If the magnet in the door is not perfectly aligned with the switch in the door frame when the door is closed the step won’t activate. Switch #2 (override switch). This toggle switch is typically located near the door and is used to keep the step extended when parked.
When do the steps retract on a Class A motorhome?
If the switch is on, the step should stay out. NOTE: If you have Class A or Class C motorhome, the steps will typically retract when the engine is running (regardless of the override switch position). The rest of the switching for the step occurs in the step controller board.
Thanks for the offer but we’ll be in Indiana that weekend. I will be at the Six State rally in MO. the week before. It did turn out to be the magnetic switch that caused the problem. I took a magnet out of one of my screw drivers and inserted it in the plastic housing and stuffed it full of paper to wedge the magnet toward the sensor.
How to fix a stuck front door lock latch that won’t retract. Now go to the hardware store and buy you a new dead latch. If the method above didn’t work, then there is one last thing you can do before taking the door off of the hinges. Take a 2 liter coke bottle and cut out a strip about 2 inches wide and 4 inches long.
If the magnet in the door is not perfectly aligned with the switch in the door frame when the door is closed the step won’t activate. Switch #2 (override switch). This toggle switch is typically located near the door and is used to keep the step extended when parked.
What to do if your steps are not working?
Do not forget to check for faulty parts or bad connections to the door switch sensor and the on/off switch to the steps. If you still cannot determine what the problem is then contact the step manufacturer and/or Jayco for help. If that fails to bring results, then you will have to take the RV to a competent RV repair facility. Hope that helps.
