How do you light a Potterton Suprima boiler?
it doesn’t have a pilot light, it’s automatic ignition. press the re-set button on the control panel on the side of the boiler. there will also be a light indicating if there’s a fault. if you can’t re-set it then there’s an internal fault.
What does an amber light mean on a Potterton boiler?
Looking at the fault finding guide which comes with the PCB upgrade kit, a flashing orange light on the PCB indicates that there is a problem with the temperature control and suggests to check the temperature control on the boiler is switched up which it was. …
What are the outputs of a Potterton Suprima boiler?
Suprima boilers are fully automatically controlled, wall mounted, fan powered, balanced flue appliances using a cast iron heat exchanger and are available in outputs ranging from 8.8 – 28.7 kW (30,000 – 98,000 Btu/h) The boilers are designed for use on fully pumped open vented or sealed water systems with an indirect hot water cylinder.
Are there any problems with the Potterton Suprima?
They came in many heat output sizes from 30,000 BTUs right up to 120000 BTUs and all in the same size case. The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.
When did the Potterton Suprima circuit board come out?
The data plate carried a “00” year code indicating it was manufactured in 2000. We removed the screw which allows the control panel to flip down and inspected the board, finding the classical darkened scorch mark which is typical of Potterton Suprima circuit boards of this type.
Are there any problems with the Potterton 120?
The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.
Suprima boilers are fully automatically controlled, wall mounted, fan powered, balanced flue appliances using a cast iron heat exchanger and are available in outputs ranging from 8.8 – 28.7 kW (30,000 – 98,000 Btu/h) The boilers are designed for use on fully pumped open vented or sealed water systems with an indirect hot water cylinder.
They came in many heat output sizes from 30,000 BTUs right up to 120000 BTUs and all in the same size case. The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.
The data plate carried a “00” year code indicating it was manufactured in 2000. We removed the screw which allows the control panel to flip down and inspected the board, finding the classical darkened scorch mark which is typical of Potterton Suprima circuit boards of this type.
The 120s were recalled a few times due to problems and eventually withdrawn, but all in all, they were a good boiler. The Potterton suprima had its faults though and one of them was the PCB or otherwise known as the printed circuit board.
