How do you get drain plug out of bathroom sink?
Grasp the retaining nut that holds the shorter end of the metal pivot rod in place against the P-trap — with of pliers if necessary — and unscrew it using a counterclockwise motion. Pull the metal pivot rod straight out from the P-trap to release the drain plug.
How do you remove a pop up drain plug?
Sometimes, soap and debris get stuck inside the drain and get the plug stuck. Pressing on the plug a bit harder can help you remove some debris. Besides the above steps, wiggling the pop-up plug clockwise and anticlockwise can also help remove it from the sink. Then you can manually remove the clog.
What to do when pop up sink plug is stuck?
Clearing a clogged drain with a popup sink plug You can use a liquid drain opener that will clear the clog if you can get the popup plug open. Stick with a gel formula that is better at dissolving clogs. Sometimes, soap and debris get stuck inside the drain and get the plug stuck.
How is the drain held in place on a kitchen sink?
Most sink drains are held in place by compression between the drain’s lip on the topside of the sink and a locknut on the underside. The locknut will be snug up against the underside of the sink. Use a large wrench or channel locks to loosen and remove it.
Grasp the retaining nut that holds the shorter end of the metal pivot rod in place against the P-trap — with of pliers if necessary — and unscrew it using a counterclockwise motion. Pull the metal pivot rod straight out from the P-trap to release the drain plug.
What to do if your sink drain stopper is stuck?
You have to disassemble the stopper mechanism to fix this. After you’ve cleared out the sink cabinet to give yourself room to work, crawl inside the cabinet face up and follow the pivot rod to the tailpiece, where you’ll find a ribbed nut. You can loosen the nut with your fingers, and after you remove it, you’ll be able to pull out the lever.
How does a bathroom sink pop up stopper work?
The pivot rod extends into the drain tailpiece and through a hook on the bottom of the stopper. You can’t pull the stopper out of the drain until you disengage the pivot rod from this hook, and to do that, you have to disassemble the entire stopper linkage.
How do you reassemble a pop up drain stopper?
It may even be worth the time it takes to remove the P-trap so you can do a thorough job. To reassemble the mechanism, drop the stopper into the drain, insert the lever into the tailpiece and hook it into the hole at the bottom of the flange. Test the connection by moving the lever up and down, making sure the stopper responds.
