How do you fix-a-leak in a Marlig hot tub?

Note: Placing the bottle into a container of hot water, prior to shaking, will ensure product is properly mixed. With pump(s) running, slowly add the FIX-A-LEAK through the skimmer or in front of any suction intake. Recirculate continuously for 6-8 hours then shut system off.

Do you have to keep refilling your hot tub?

Because your spa takes care of you, it’s only fair that you give it a little TLC in return. It doesn’t take much to maintain your spa on a regular basis —just keep the water clean, and periodically drain it, clean it, and refill it.

How do you drain and refill a hot tub?

Turn the power to the spa off at the circuit breaker. Place your submersible pump in the hot tub footwell or deepest point. Run the hose to your drain. Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.

What should I do if my hot tub is leaking?

With a leaking hot tub, first, remove the paneling to locate the leak. The most likely causes will be a rubber gasket at the heater connections, a cracked pipe, or a loose jet. If it’s not possible to access the leak’s location, use leak fix products for small leaks, or waterproof epoxy putty for larger leaks.

How do you clean an empty hot tub?

Turn the pump on and let the spa drain. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage. Clean your empty spa. Once the water is drained, you can easily inspect and wash the shell’s interior, and remove and clean your spa filters before refilling it.

What to do if you have a leak in your hot tub?

Sealant won’t fix everything, but it’s a great solution for small leaks. For all types of spas, hot tubs, and pools. For leaks in walls, floor, housing, return lines, suction lines, skimmers, fittings, etc. For water loss in spa / hot tubs of less than 3 mm per day.