How do you fix a G Max toilet?
Adjusting the G-Max flushing system correctly addresses both of these problems. Turn off the toilet water supply at the cutoff valve behind the toilet. Lift the lid off the toilet tank and place it on a flat surface out of the way. Pull the refill tube away from the G-Max fill valve with your fingers.
What makes the Toto G Max flushing system different?
TOTO’s G-Max flushing system is a bit different from most brands. The main difference is the fill valve portion of the system. Unlike other fill valves, the G-Max float sits inside a housing, resulting in fewer loose moving parts.
Why is my Toto toilet fill valve not working?
The most likely cause of this is that there’s no proper slack in flapper chain. To solve this issue, adjust the flapper chain for proper slack. Another reason this might be happening is that the flush valve flapper is dirty. Try inspecting the valve to see if it’s dirty and if so, clean it and see if the problem still persists.
How do you turn off the G Max flushing system?
Turn off the toilet water supply at the cut-off valve behind the toilet. Lift the lid off the toilet tank and place it on a flat surface out of the way. Pull the refill tube away from the G-Max fill valve with your fingers. Hold the shaft of the fill valve, and unsnap the top valve cover with your free hand.
How can I Fix my Toto G Max toilet?
Replace the gasket on the valve and insert the valve body back into the toilet tank. Turn it so that the colored buttons on top of the assembly are in their original position. Turn the water supply back on and flush the toilet several times to check for leaks. Ensure that the water supply valve is fully open.
What to do if your Toto toilet is not Flushing?
When properly assembled to the valve body, the ribs on top of the cap aligns with the float chamber and refill port on the side of the valve body. Turn off the main water supply and remove the tank lid. If your G-Max toilet is running without flushing, the fill valve seal may be dirty. Open the valve cap and clean the seal using a damp cloth.
The most likely cause of this is that there’s no proper slack in flapper chain. To solve this issue, adjust the flapper chain for proper slack. Another reason this might be happening is that the flush valve flapper is dirty. Try inspecting the valve to see if it’s dirty and if so, clean it and see if the problem still persists.
Where is the flush valve on a Toto G Max?
Locate the flush valve and note the position of the colored button on top of the flush valve. Remember this for reassembly. Turn the upper portion of the valve assembly counterclockwise and pull it out. Remove the black seal gasket from the base of the flush valve and rinse it with clean water.
