How do you fix a dry code on a hot tub?
This error message is similar to the FLO error message. Like FLO issues, this can commonly be fixed by topping off your hot tub water level. DR or DRY will show up if there is little to no water travelling through your heater.
What does it mean when your hot tub is dry?
Newer hot tubs have a digital display for error codes that can assist with troubleshooting. A message such as “dr” or “dry” or “heater dry” is a warning that there’s no water in the heater tube, says Niagara Hot Tubs.
Why does my hot tub have an error code?
A Sensor Failure Message may indicate Excessively High Heater Temperatures which can scald or Burn! If the Heater is Not Cool Enough to Safely Service, allow the Heater to Cool before Testing. The Spa is Operating in the “Standard” (Std or St) Heating Mode. Between filter cycles, the water temperature is sampled every 30 minutes.
What does the code OH mean on a hot tub?
OH : Overheat. Spa temp over 108°. HLoH : Hi Limit Over Heat. Hi limit sensor is disconnected, shorted, or spa temp is above 112° F. SEoP : Sensor open or disconnected. Heater disabled but spa operational. SESH : Sensor short, nonfunctional. Heater disabled but spa operational.
Why is my hot tub in economy heating mode?
If the Ecn or Ec Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Economy Heating Mode. If the Ecn or Ec Message is ON Solid (Not Flashing) on the Display, the Spa is Operating in the Economy Heating Mode, but there is No current water temperature because the Spa is between Filter Cycles.
Newer hot tubs have a digital display for error codes that can assist with troubleshooting. A message such as “dr” or “dry” or “heater dry” is a warning that there’s no water in the heater tube, says Niagara Hot Tubs.
A Sensor Failure Message may indicate Excessively High Heater Temperatures which can scald or Burn! If the Heater is Not Cool Enough to Safely Service, allow the Heater to Cool before Testing. The Spa is Operating in the “Standard” (Std or St) Heating Mode. Between filter cycles, the water temperature is sampled every 30 minutes.
What to do if your hot tub wont turn on?
Pumps and Blower can be turned ON and OFF to remove any Air from the Heater. On EL and GL Systems Only, equipped with a “Mode” Button, the Ozone Generator can be Turned ON for15 Seconds and OFF by using the “Mode” Button. No automatic functions will turn ON during this time, and the Heater will Not Start.
Why is my Tiger River hot tub not working?
My hot tub produces a code that says heater may be dry and… water became cloudy, then after several days, recirculating pump stopped, and jets stopped working correctly. Got a message “WAIT HTR MAY BE DRY.” heated doesn’t seem to be working right. Tub only 18 … read more Trying to diagnose issue with my Tiger River Sumatran Hot Tub.
