How do you fit a close coupled toilet?

Here is how to fit a close coupled toilet. Step 1. If you’re replacing an old toilet, you’ll already have access to the waste pipe and the water inlet. Start by fitting the cistern parts using the instructions provided. Step 2. Connect the cistern to the pan. Step 3

How do you replace the seat on the toilet?

Now simply place the new seat over your loo and line up the fittings to the back of the toilet seat. Make sure the seat is central to the bowl and then tighten the nuts once you’re happy. You may need pliers or a wrench at this point to help tighten them. Did you find this guide useful?

Can a toilet seat be held in place by a different fitting?

Some toilet seats will be held in place using a slightly different fitting but they generally all work in the same way. If yours is different, take a look around the fittings and you should be able to work out how to detach it. Step 3. Fitting a new toilet seat Once you have removed the old seat it’s time to fit the new one.

What’s the best way to fit a toilet?

Start by fitting the cistern parts using the instructions provided. Connect the cistern to the pan. Place the toilet in position, then mark the wall fixing holes for the cistern as well as the base of the pan. Set the toilet aside, then check for wires and pipes before drilling the holes into the floor.

Is there a way to fit a new toilet seat?

I want to fit a new seat on a toilet which does not offer me any access to the underside of the holes to fit the usual wing nut fittings. Short of unplumbing the whole thing I cannot think of a way to fit a seat.

What’s the best way to close a toilet seat?

Lift the toilet seat straight up off the hinges from the upright position. Leave the soft-close seat in the fully open position. Hold the seat at the top and bottom or at both sides and carefully pull it straight up off the metal pegs.