How do you convert salt cell to t15?

Push 8, Cell Size – With the Display showing its default value of “Average Salt Level”. Push the Diagnostic Button 8 times to bring up the “Cell Size”. It will read one of 4 values; t-3, t-5, t-9, or t-15. In this case the display is showing “t-9”.

What should the salt level be on aquarite?

If salt level is below range, add enough salt to achieve a salt level of 3200ppm. (Refer to Salt Chart, Page 21) HAYWARD Step B Inspect and/or Clean Cell If cell looks like 4A, go to step C. If cell looks like 4B, clean cell. (Refer to Pages 12 thru 15) Page 2

How to troubleshoot your Hayward Aqua rite salt system?

Troubleshooting and diagnosing their problems. If you’re reading this blog that means you need help troubleshooting your Hayward Aqua Rite salt system. Well, the good news is you are at the right spot and you’re definitely not alone. This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward.

What’s the best way to clean an aquarite cell?

Instructions We strongly recommend using a Goldline Controls cell cleaning stand. (GLX-CELLSTAND) Step 1: Use a water hose to dislodge small debris. Step 2: Use a non-metal (plastic or wood), non-abrasive tool to dislodge minor calcium buildup and small debris. Step 3: Use a solution of water and Muriatic acid.

How long to let aquarite stand in solution?

Stand the cell vertically in the solution. M’x 1 part acid to 4 parts water. The level of the solution should be slightly over the product label. Let the cell stand in the solution for 15 minutes (Fig. 6A below), then flip the cell over and let stand on the other end (Fig. 6B below) for an additional 15 minutes.

How big are the Hayward aquarite salt cells?

Hayward now offers a new line of Turbo Cells for their salt chlorination and controls solutions. The cells now come in three sizes – 40,000 (151,000L), 25,000 (94,000L) and 15,000 gallons (56,000L). The new sizes enable you to right-size your system for the most efficient and cost-effective chlorination possible.

What are the components of an aqua rite salt system?

There are two components to Aqua Rite: the control box and its patented Turbo Cell, a specially designed electrolytic converter that installs on your system’s return line, behind the pump, filter and heater.