How do you clean an evaporator coil?

Mix warm water and a simple detergent in a spray bottle, hand sprayer or garden sprayer. Apply the water and detergent solution to the evaporator coils. Give the solution a few seconds to a few minutes to soak in and loosen debris. Reapply as needed.

Can I clean AC coils yourself?

Mix a simple detergent and warm water in a spray bottle or garden sprayer. Spray the solution onto the evaporator coils and give it a few minutes to soak in and loosen the dirt and debris. Wipe away any loosened material with a soft brush or cloth and reapply as needed.

Will dirty sock syndrome go away on its own?

Just don’t ignore Dirty Sock Syndrome if it goes away on its own! When the shoulder seasons are over, the smell often lessens or goes away completely. This doesn’t mean you’re off the hook. All the junk on your coil is still there, and it will stink again when the conditions are right.

What should I do if my air conditioner heat strip is broken?

If your air conditioner is only blowing room temperature air when you turn on the heat strip, it’s most likely broken and will either need repairs or replacement. Because of the danger of an electric shock, you should only entrust this work to a professional.

What’s the best way to clean an AC unit?

Unscrew the top grille. Lift out the fan and carefully set it aside without stressing the electrical wires. Pull out any leaves and wipe the interior surfaces clean with a damp cloth. Spray the fins using moderate water pressure from a hose nozzle. Direct the spray from the inside out.

How does an electric heat strip work on an air conditioner?

Call us for both excellent heat strip installation and heat strip repair. An electric heat strip looks like a series of coils. It attaches to the air handler on an air conditioning system and then heats the air coming out of the blower (with the AC in “fan only” mode). Essentially, it converts the air handler into a small-scale electric furnace.