How do you clean a MTI tub?

A mixture of mild dish detergent mixed in warm water is all that should be needed. Hard water and certain bathing products may require additional effort with a soft brush. To keep all the jets and plumbing lines clean, MTI recommends using its Fresh Wave detergent, available from your local distributor.

How do you fix a jetted bathtub?

Shut off the water valve to the tub, this will be on the opposite wall of the tub spout. Go to the tub and remove the service panel. This panel may be hidden by using similar materials as the tub body. Ensure the air compressor is plugged into the power source. Turn the jets on. Listen to each jet for air pressure.

Why is there no water in my jetted tub?

If the button works and there are no leaks, but water still won’t pump into the tub, then the issue could be with the jets. Check the outer ring on the jets. Rings turned to the right are inactive. Turn to the left and test the tub. If that is not the issue, then the jets might be clogged.

How does a jetted bathtub pump work?

With all of the usual conventional components of a bathtub, jetted tubs also have a water intake, also known as a suction plate, that sucks the water toward the pump, which then redirects the water to the jets. The pump’s motor can be set to different speeds to determine the pressure at which the water is expelled through the jets.

Do you need to replace air switch on jetted tub?

If that is the case, then the switch will need to be replaced. To remove the tub’s air switch, you may need to reach underneath the tub through the crawlspace and twist off the securing nut from beneath with a wrench. Once the switch is removed, the new switch can be installed per user instructions.

What kind of repairs can you do on a jetted tub?

We can perform all kinds of jetted tub repairs including bathtub switch repair, air control repair, bathtub jet repair and bathtub pump repairs. Because we specialize in jetted tub repair, most jetted tub repairs are completed in the same day. We are proud to use the highest quality Made in America parts.

How many Freestanding bathtubs does MTI have?

MTI currently offers more than 70 freestanding bath tubs available in a large selection of sizes, styles and materials. Most of these tubs, including the Engineered Solid Stone® models, are available with MTI’s state-of-the-art thermo-air massage system | Go to freestanding tubs

How do you test a jetted bathtub?

Test the tub. Shut off the water valve to the tub, this will be on the opposite wall of the tub spout. Go to the tub and remove the service panel. This panel may be hidden by using similar materials as the tub body. Ensure the air compressor is plugged into the power source. Turn the jets on. Listen to each jet for air pressure.