How do you clean a Jandy AquaPure sensor?
Turn the flow/temp/salinity sensor counterclockwise to remove it from the three-port cell. Clean the sensor contacts gently with a household cleaning pad. Rinse well with water. This should be done yearly.
How does Jandy aquapure salt water pool system work?
The Jandy AquaPure ® salt-water chlorine sanitizing systems use salt water to deliver high-performance water sanitation with uncompromised performance, reliability and hydraulic efficiency. Rely on its sturdy design and simple features to create your saltwater oasis.
When do you add salt to a Jandy pool?
1. Set Unit to “00” % for 24 Hours. Broadcast or Spread Salt into Shallow End of Pool. 2. Do not Add Salt through Skimmer, Main Drain or Surge Tank. Directions for Adding Salt:
How to change the salinity reading on aquapure?
•Press and release the “Temperature “ button within 5 seconds to enter the salinity calibration screen. •The system will display the salinity reading, press the up arrow to increase the reading and the down arrow to decrease the reading. •When the proper reading is reached press the “Temperature” button within 5 seconds to store it in memory. 15
How does Aqualink and aquapure work together?
Exclusive Tri-Sensor technology provides reliable electronic water flow detection to sustain maximum performance, even at very low flow rates When combined with PureLink™ power centers, AquaLink and AquaPure work together for the ultimate in pool sanitizing and remote operation convenience
Which is salt water pool purifying system does Jandy use?
Jandy Pro Series AquaPure is a heavy-duty, electronic saltwater swimming pool purifying system that uses ordinary salt to produce chlorine for salt water swimming pools.
What do I need to know about Jandy aquapure?
1. Flow/ Salinity sensor indicates water temperature at sensor above 108 F. Reduce your water temperature. 2. Troubleshoot with Jandy or a licensed professional. 1. Verify proper flow/temp/salinity sensor was installed properly. 2. Check salinity. Add if necessary.
Where can I buy the Jandy Pro Series truclear?
The Jandy Pro Series TruClear Saltwater Chlorinator is the newest Salt Water System by Zodiac Pool Systems. The TruClear is only available from your local pool service company or pool retail store.
Can You retrofit a Jandy truclear to an aquapure cell?
If you already have a Jandy AquaPure Salt Cell System, they sell a retrofit version of the TruClear that will thread right into the existing plumbing for the AquaPure Cell. For the Retrofit version you would order this version:
