How do you clean a Hydropool hot tub?
Cleaning Process
- Prepare a solution of EZ Filter Nu and hot water (preferable) in a clean plastic pail, laundry tub or specific filter cleaning container.
- Remove the filter cartridge(s) from the filter housing and rinse with garden hose to remove physical debris.
What to do if your Hydropool Hot tub does not reset?
Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If the hot tub does not reset, shut off power to the spa and call your supplier for a service. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 41.7 the spa should automatically reset.
What does hi limit mean on a hot tub?
Hi limit sensor is disconnected or shorted or the spa temperature is above 112° F. SEoP = Sensor open or disconnected. Heater disabled but the spa is operational. SESH = Sensor short, nonfunctional. Heater disabled but the spa is operational. PSoC = Pressure switch open with circulating pump. PSoL = Pressure switch open with low pump.
Why does my hot tub have an error code?
These codes are related to flow issues or the pressure switch/flow switch and are by far the most common error codes. These error codes are caused by a variety of reasons. The fundamental reason is water flow through the spa control system, if the water is not flowing at a rate to satisfy the switch, it will result in one of the error codes above.
What to do when your spa light goes off?
Shut the spa power off, remove the filter and make sure all the jets are open. Then power the system back up, if the error code goes away, the problem was either a dirty filter (clean or replace) or too many jets were closed off.
Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If the hot tub does not reset, shut off power to the spa and call your supplier for a service. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 41.7 the spa should automatically reset.
How big is the Hydropool self cleaning hot tub?
Hydropool’s Self-Cleaning 670 is a 6-person hot tub with a comfortable lounger and a great leg massage. 670 Platinum670 Platinum6-7Build ItView Details Hydropool’s Self-Cleaning 670 is a 6-person hot tub with a comfortable lounger and a great leg massage. 695 Gold – 7 Person Hot Tub695 Gold – 7 Person Hot Tub6-7Build ItView Details
What to do if your hot tub has an error code?
If however you have the fault then the first thing to do is shut the spa down, do not empty, remove the filter and make sure all the jets are open (as best you can). Then re-start the hot tub, if the error code goes away, the problem was either a dirty filter (clean or replace) or too many jets were closed off.
Where is the Hydropool Hot Tub company located?
Headquartered in Mississauga, Canada, Hydropool Hot Tubs Inc. originated in 1970 as a commercial swimming pool company and in 1978 became one of the first hot tub retailers in North America. Our products are now sold through a 250+ retailer network in over 40 countries.
