How do you clean a DE filter with muriatic acid?
DE Filter Grids Clogged with Scale Using an10% acid solution, pour a gallon of muriatic acid into 10 gallons of clean water, in a very clean trash can. Soak the grids or grid assembly for a few hours to remove mineral scale deposits from DE grids.
Why is my Hayward perflex de filter EC50 leaking?
Added the 5lbs of DE powder. Everything is good. Noticed a little drip where the motor connects to the filter, but no problem, just tighten up. Went inside for a while, came back out and water was leaking from where the lid caps on to the filter body. I checked the clamp and the sleeve nut. Tightened as tight as it would go, coils touching.
Do you need replacement parts for Hayward perflex?
Hayward makes many replacement parts for the EC Perflex filter line so there is no need to worry about finding or buying replacement parts. You will only need a few common tools to be able to take apart and fully rebuild or repair your EC30, EC40, EC50 or EC65 swimming pool filter.
Where are the O rings on the Hayward perflex filter?
If you have an old Hayward EC series filter with multiple bolts in the top you will want to make sure to tighten them down evenly to prevent leaks. On the bump shaft on the Hayward Perflex you will see two different o-rings.
What are the names of the perflex pool filters?
Hayward Swimming Pool Products makes a D.E. pool filter called the Perflex EC-Series Swimming Pool Filter. They make a few different sizes of this Perflex pool filter. The different names of the EC filters are the EC-30, The EC-40, The EC-50 and The EC-65, which is the largest model of the EC-SERIES line.
Added the 5lbs of DE powder. Everything is good. Noticed a little drip where the motor connects to the filter, but no problem, just tighten up. Went inside for a while, came back out and water was leaking from where the lid caps on to the filter body. I checked the clamp and the sleeve nut. Tightened as tight as it would go, coils touching.
How can I replace my Hayward perflex pool filter?
Once you have removed the two bolts you can remove the handle from the top of the Hayward Perflex Pool Filter tank. Now you will want to replace the handle with the new bump handle. To do so align the holes on the bump handle with the holes at on the filter tank and then push the bolt through.
If you have an old Hayward EC series filter with multiple bolts in the top you will want to make sure to tighten them down evenly to prevent leaks. On the bump shaft on the Hayward Perflex you will see two different o-rings.
What should I do if my perflex water filter is leaking?
If your filter lid has a clamp, tighten all the way, and if you have lid screws, tighten in a star pattern, for equal tightness. A filter leaking water around the Bump Shaft, you will need to replace the small o-rings that are on the bump shaft, beneath the lid.
