How do you change the mode on Balboa spa?
How do you change the mode on a Balboa hot tub? Mode is changed by pressing the Temp or Set button, and then pressing the Light button. If there are UP and DOWN buttons, use the UP button. Do not press the buttons at the same time.
How do you put a Balboa hot tub in Standard mode?
Balboa Controller VS500Z and VS501Z Mode Settings for Standard, Economy and Sleep. Mode is changed by pressing the Temp or Set button, and then pressing the Light button. If there are UP and DOWN buttons, use the UP button. Do not press the buttons at the same time.
How do I get my Balboa spa out of EC mode?
To exit, press the light button or wait for 10 seconds to go back to the Main Screen. To check, next to range there is an arrow – if pointing down its in low range, if pointing up its in high range. Remember allow 1 degree per hour to heat back up when changing from low range to high range.
Can a Balboa hot tub be left on?
The hot tub is left on and by using the modes on the Balboa spa control system, the energy efficiency is improved & savings can be made. All Balboa hot tubs have energy saving modes (standard, economy and sleep) or ready & rest mode for the BP Series. Each mode has its benefits and at least 2 of the modes need to be used to give efficiency.
What does it mean when your Spa is on Economy mode?
Turn off the breaker and all power to the hot tub for 5 minutes. Then restart the hot tub and let me know what happens. In the meantime could you explain to me exactly what you mean by economy mode.
What are the modes of the Balboa SPA system?
The hot tub is left on and by using the modes on the Balboa spa control system, the energy efficiency is improved & savings can be made. All Balboa hot tubs have energy saving modes (standard, economy and sleep) or ready & rest mode for the BP Series.
How do I get my hot tub out of Economy mode?
Mode is changed by pressing the Temp or Set button, and then pressing the Light button. If there are UP and DOWN buttons, use the UP button. Do not press the buttons at the same time. It’s one button, release, and then the other button.
The hot tub is left on and by using the modes on the Balboa spa control system, the energy efficiency is improved & savings can be made. All Balboa hot tubs have energy saving modes (standard, economy and sleep) or ready & rest mode for the BP Series. Each mode has its benefits and at least 2 of the modes need to be used to give efficiency.
Can a standard hot tub be used in Economy mode?
Standard The temperature of the hot tub will be reach & maintained when in standard mode. Economy The hot tub will only use the heater when the spa is in “filter mode” and the water has encountered a drop in temperature below the standard thermostat setting.
The hot tub is left on and by using the modes on the Balboa spa control system, the energy efficiency is improved & savings can be made. All Balboa hot tubs have energy saving modes (standard, economy and sleep) or ready & rest mode for the BP Series.
What does SL mean on a Balboa hot tub?
Sleep Mode (sl) = heats to within 10 degrees (less) than preset temperature and only during the filtration cycle. Filtration Cycles run from F1 to F8 (F1 = 1 hour every 12 hours / F8 = 8 hours every 12 hours). Preset cycle set from factory is F1, so if in ec or sl mode your water will not reach desired temperature.
