How do you adjust the temperature on a Viking hot tub?

How do you adjust the temperature on a Viking hot tub?

The mode is changed by pressing the “Temp” button, then pressing the “Light” button. Standard Mode is programmed to maintain the desired temperature. Note that the last measured spa temperature displayed is current only when the pump has been running for at least 2 minutes.

Is 80 degrees good for a hot tub?

The maximum recommended safe temperature for a hot tub is 104°. Soaking time at this temperature should not exceed 20 minutes. For summer, try 102° or even 100° in order to feel refreshed not enervated by the heat. Kids under 12 usually prefer lower temperatures in the summer.

How do I lower the temperature in my hot tub?

Lower the Water Temperature Your hot tub temperature usually hovers around 100 degrees, so dial down the temperature to 85 degrees to cool off the water. If the outside temperature permits, feel free to turn off the heater altogether. Bonus: When the temperature is lower, there’s not limit to how long you can soak.

What temp should you leave your hot tub at?

FINDING THE IDEAL TEMPERATURE FOR YOU According to the US Consumer Product Safety Commission, the water temperature of a hot tub is best between 100°F and 102°F.

Is 35 degrees hot enough for hot tub?

Hot tubs don’t just have to be used in the winter; you can also use them to cool off in the summer too. Depending on how cool you want the water to be, we recommend experimenting with temperatures between 29 and 35°C to find the most comfortable temperature to suit you.

When to lower the water temp in a spa?

Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes. b) Since excessive water temperatures have a high potential for causing fetal injury during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperature to 100°F (38°C).

What should the temperature be in a spa heater?

Temperature in the spa heater housing is below 40° F. Status of the heater element is unknown. The low speed pump or circ pump will operate continuously until the temperature rises above 45° F. Over heat. The spa is at a temperature above 108° . Do not use spa when temperature is flashing or the OH message is displayed.

What should the temperature be in the Arctic spa?

The other thing to keep in mind is that the Arctic Spa’s really designed to run at 100 degrees or above. So if you’re trying to run it down into the 90 degree range, the Arctic Spa just is simply not designed to be able to maintain that temperature, especially when it’s 100 degrees outside, or something like that.

How can I get my hot tub to cool down?

When you are using your spa there are a couple tricks to help cool water down. With the cover open you can turn on the air or air jets and circulate cool air into the spa. This is especially effective as the air temperature starts to cool down.

Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes. b) Since excessive water temperatures have a high potential for causing fetal injury during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperature to 100°F (38°C).

The other thing to keep in mind is that the Arctic Spa’s really designed to run at 100 degrees or above. So if you’re trying to run it down into the 90 degree range, the Arctic Spa just is simply not designed to be able to maintain that temperature, especially when it’s 100 degrees outside, or something like that.

When you are using your spa there are a couple tricks to help cool water down. With the cover open you can turn on the air or air jets and circulate cool air into the spa. This is especially effective as the air temperature starts to cool down.

When to use Spa when temperature is flashing?

Do not use spa when temperature is flashing or the OH message is displayed. HLoH = Hi Limit Over Heat. Hi limit sensor is disconnected or shorted or the spa temperature is above 112° F. SEoP = Sensor open or disconnected. Heater disabled but the spa is operational. SESH = Sensor short, nonfunctional.

You Might Also Like