How do you adjust the temperature on a Bullfrog Spa?
Adjust the temperature on the Bullfrog hot tub from the control panel. Press the “Warm” or “Cool” button on the control panel to see the current setting. Press “Warm” to increase the temperature. The temperature setting increases by one degree each time you press the button.
Why does my Bullfrog spa shut down for 15 minutes?
Means there is a possibility of dry heater or an insufficient amount of water in the heater in order to start it. The spa system will shut down for 15 minutes. Press any of the buttons in order to reset heater start-up. See box for “Flow Related Checks” down below.
What happens in priming mode on a bullfrog spa?
During Priming Mode, the heater is not permitted to run. Keep in mind that the spa will turn on with Jets 1 during Priming Mode if it has a Circ Pump. When you exit the Priming Mode, the Circ Pump runs by itself. Means that the temperature of the water is unknown. The temperature will be displayed after the pump runs for 1 minute.
What does it mean when water temp is high on Bullfrog spa?
This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions. Once the spa water temperature is below 108°F (42.2°C) the system will auto reset. Conduct verification checks for high ambient temperatures and extended pump operation.
What do the error codes on a bullfrog spa mean?
These are the error codes and display messages that a Bullfrog Spa may display, along with what they mean and the action required: There will be many messages and alerts that appear on the main screen during your ownership. Many of them may be displayed in sequence. You can often reset the spa unit by pressing the “jets” button.
During Priming Mode, the heater is not permitted to run. Keep in mind that the spa will turn on with Jets 1 during Priming Mode if it has a Circ Pump. When you exit the Priming Mode, the Circ Pump runs by itself. Means that the temperature of the water is unknown. The temperature will be displayed after the pump runs for 1 minute.
What to do if your Bullfrog spa pump is stuck?
SHUT DOWN THE POWER TO THE SPA. DO NOT GO IN THE WATER. Contact service organization or your dealer. Spa pump most likely is Stuck ON when the the spa was last powered. SHUT DOWN THE POWER TO THE SPA. DO NOT GO IN THE WATER. Contact service organization or your dealer.
This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions. Once the spa water temperature is below 108°F (42.2°C) the system will auto reset. Conduct verification checks for high ambient temperatures and extended pump operation.
How to prevent airlocks in a bullfrog hot tub?
To prevent airlocks when filling your spa, be sure to open all valves in the JetPaks and all other jets in the spa before filling to allow as much air as possible to escape from the system during the filling process. Fill your spa through the filter by taking the filter cap off and put the hose directly in the filter.
