How do I unlock my Sundance Optima spa?
Hear this out loudPausePress DISPLAY, MODE and (down) button within 3 seconds to unlock panel. HOLD Control Panel and remote panel are temporarily deactivated. Buttons have been pressed too often in short period of time. Do not press any buttons for 30 seconds.
What are the dimensions of a Sundance Optima spa?
The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L).
How tall is the spa at Sundance Resort?
The Sundance Optima Spa has an overall height of 37.5” (95.3 cm), width of 89” (226.1 cm), and length of 89” (226.1 cm). It seats 6-7 people and has a total volume of 410 gal (1552 L). The Sundance Optima Spa is a no-lounge spa that seats six to seven adults and has a height structure that would fit diverse body sizes.
What to do if the main pump is off in Sundance spa?
If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.
What happens when Sundance spa goes into watchdog?
When the spa goes into the Watchdog the spa will not operate. This is how it happens: When you try to use the spa, you will see 3 or 4 dashes on the control panel (depends upon the model). If you try and reset your breaker, sometimes it comes on but it will probably go back into Watchdog error – – – -.
What do you need to know about Sundance Optima?
Plus, upgraded spa cover designed for cold, harsh climates. Turn your connected home and smart devices into your personalized spa assistant, from adjusting key spa settings from anywhere, 24/7 to real-time energy reports and notifications to you and your dealer when your spa needs attention. 4.
If debris is present, remove debris, install switch and test system. If condition still exist, replace switch.) if switch measures infinite (no continuity) with pump off, switch is OK, Turn on Main pump and measure across switch terminals for continuity. If continuity is measured, switch is OK.
When the spa goes into the Watchdog the spa will not operate. This is how it happens: When you try to use the spa, you will see 3 or 4 dashes on the control panel (depends upon the model). If you try and reset your breaker, sometimes it comes on but it will probably go back into Watchdog error – – – -.
When did the Sundance Spas 880 series start?
2007 880 Series ������������������������������������������������������������������������������������������������������������������������������������������� 1