How do I unlock my Beachcomber hot tub?
To unlock, press the , , pads within 2 seconds. Press or then within 3 seconds, to prevent the hot tub from operating at any time. Standby mode should be used when replacing the filter.
How do you change the mode on a Beachcomber hot tub?
To change heating modes, press the button then the button. To activate this jet pump, press the button once to activate low speed, twice to activate high speed and three times to turn the pump off. The low speed will turn off automatically after 4 hours and the high speed will turn off after 15 minutes.
Why is my Beachcomber Hot Tub not resetting?
My Beachcomber Hot tub control panel is showing “FL” and will not reset. What is the possible fault and can I do My Beachcomber Hot tub control panel is showing FL and will… When the door was closer and the cycle was started it started making a clanging sound and the FL code symbol was showing.
What should the water temp be in a Beachcomber Hot Tub?
Refer to the temperature adjustment instructions for your topside control panel type. Always check the temperature of the water before entry with an accurate thermometer. Recommended time in water at 100°F / 38°C is 10 minutes. WATER TEMPERATURE MAY NEED TO BE DECREASED FOR CHILDREN OR THE ELDERLY.
Is there a money back guarantee on Beachcomber Hot Tubs?
The company offers a 30-day money back guarantee on their products, and they also offer many innovative design options such as the Hybrid3 and custom jetting. One of the main focal points of Beachcomber Hot Tubs is producing products that are as energy efficient as possible.
What is the serial number on a Beachcomber Hot Tub?
MODEL NUMBER: DATE OF PURCHASE: HOT TUB SERIAL NUMBER: STORE NAME: GUARANTEE NUMBER: STORE PHONE: Your hot tub is an investment in your health and happiness. This Owner’s Guide is intended to give you instructions on the basic operation of your hot tub.
What to do when your Beachcomber Hot Tub is not working?
When you experience weak water flow, indicated by a “DR” error message on your Beachcomber’s control panel, check and open all of the knife valves, the T-shaped handles located on the spa’s pump connections. Pull the plunger up to open each valve, and press it down to close it.
Where is the Beachcomber Hot Tub company located?
Beachcomber is a hot tub manufacturing company based in British Columbia, Canada. They have been making spas since 1978 and was one of the first spa companies to adapt the vacuum form acrylic.
What do error codes mean on Beachcomber Hot Tubs?
These are the error codes and display messages that Beachcomber hot tubs may display, along with what they mean and the action required: Means there is no message to display. The power was shut off to the hot tub. GFCI breaker is still on, however, control panel displays blank. Fuse (s) to system is/are blown.
Where is the knife valve on a Beachcomber Hot Tub?
Verify that the knife valve located on the heater’s return side is closed – once verified it’s closed, be sure all the knife valves are in the open or up position. Shut the power down to the hot tub and call the Beachcomber store if the hot tub won’t reset.
