How do I turn on Catalina Spa?
Jets 3 (optional) Press the “Jets 3” button once to turn pump 3 on or off. If left running, the pump will turn off after 15 minutes. Press the “Light” button to turn the spa light on or off. If left on, it will automatically turn off after 4 hours.
How do you adjust the temperature on a Catalina spa?
Press the or button once to display the set temperature. Each time either button is pressed again, the temperature setting will increase or decrease depending on which button is pressed. After three seconds, the LCD will automatically display the last measured spa temperature.
What are the parts for a Catalina hot tub?
The Cat200 panel is a simpler Balboa panel than the more elongated “Cat8000”. The oval Cat2000 operates 2 pumps and a blower. The 4 button Cat100/102 and 105 panels have the smaller display in the center. Some spa controllers/system packs include the Balboa EL8000.
How to replace a Balboa in a Catalina spa?
See our Balboa control panels and spa packs to find a suitable replacement for your Balboa equipped Catalina Spa. The Cat200 panel is a simpler Balboa panel than the more elongated “Cat8000”. The oval Cat2000 operates 2 pumps and a blower. The 4 button Cat100/102 and 105 panels have the smaller display in the center.
Why is my spa pump not responding to my buttons?
Derek it sounds like you may have a bad remote panel. Try disconnecting the remote panel from the sensor loom inside the skirt panel. Then try your main control panel button again. If it still does’nt work you may have a bad main control panel, bad connection at the PWA or a bad PWA.
What to do if your hot tub control panel is not working?
Examine the panel to see if any moisture is inside the display. See if the panel or any buttons are cracked or if it could have possibly gotten wet. If only part of the control panel is not working, check for any blinking lights or error messages.
The Cat200 panel is a simpler Balboa panel than the more elongated “Cat8000”. The oval Cat2000 operates 2 pumps and a blower. The 4 button Cat100/102 and 105 panels have the smaller display in the center. Some spa controllers/system packs include the Balboa EL8000.
How does the hot tub control panel work?
The hot tub control panel is like a timer that keeps the spa’s temperature constant. It turns off the spa when you forget to and troubleshoots problems. Thus, it is very important to have a spa control system in good working condition. Many issues could face your spa, including electrical issues.
See our Balboa control panels and spa packs to find a suitable replacement for your Balboa equipped Catalina Spa. The Cat200 panel is a simpler Balboa panel than the more elongated “Cat8000”. The oval Cat2000 operates 2 pumps and a blower. The 4 button Cat100/102 and 105 panels have the smaller display in the center.
How to troubleshoot a spa control panel problem?
Reset the control panel if it only displays dashes and not error messages. Turn the power off for one hour and then turn it back on. If the control panel is displaying strange messages or have lights blinking at the same time, it could be a software issue with the circuit board. Check if there is corrosion or condensation.
