How do I turn off my Pentair salt Cell?
Since you have the easy touch load center, go to the menu-settings-intellichlor then disable. Turn your SCG breaker to off and unscrew/unplug the cable from the bottom left of the load center.
When does the ic-40 cell light go off?
Check your IC-40 settings and visully check the cell throughout the run time. Perhaps you are only seeing the cell during the down time. I know that the cell light comes on and goes off as it makes chlorine for a certain time based on input (20, 40, 60, 80, 100).
Is there a warranty on an intellichlor ic-40 cell?
Pentair says the warranty period for the new cell began when the old (original) cell was installed. So I got a cell that was manufactured less than three years ago, and only at 60% of its life. I would have thought Pentair could have at least given me a prorated discount.
Why is my ic-40 flow light still green after cleaning?
Our Easytouch shows the salt level at 3140 (a little lower than the 3300 printed on the cell) and it lists status as no issues. All lights on the cell are green after cleaning. I haven’t read anything in the IC-40 manual about psi being too high, and I’m sure the flow was quite restricted as well, but the flow light was still green.
Check your IC-40 settings and visully check the cell throughout the run time. Perhaps you are only seeing the cell during the down time. I know that the cell light comes on and goes off as it makes chlorine for a certain time based on input (20, 40, 60, 80, 100).
Our Easytouch shows the salt level at 3140 (a little lower than the 3300 printed on the cell) and it lists status as no issues. All lights on the cell are green after cleaning. I haven’t read anything in the IC-40 manual about psi being too high, and I’m sure the flow was quite restricted as well, but the flow light was still green.
Pentair says the warranty period for the new cell began when the old (original) cell was installed. So I got a cell that was manufactured less than three years ago, and only at 60% of its life. I would have thought Pentair could have at least given me a prorated discount.
Why is the flow light on my Pentair ic40 red?
Flow Light is Red The light should be green under normal operations. That means that proper flow is passing via the cell. If the light is red, that means that there is insufficient flow via the cell for the right operation.
