How do I turn off Intellichlor IC40?
Since you have the easy touch load center, go to the menu-settings-intellichlor then disable.
How long does an Intellichlor IC40 last?
Expect to get about 5 years of use out of your IntelliChlor chlorine generator — it obviously will depend on how much you use it and whether or not you maintain it properly, but, if all goes well, it should last you about five years.
What should my Intellichlor salt level be?
What should the salt level be? The intellichlor is set to function when the salt level is between 2800 ppm and 4500 ppm. Too little, it cannot make chlorine. Too much salt and it also cannot (should not) make chlorine and can cause additional voltage issues with your pool and equipment.
When should I turn on my salt generator?
Before adding salt to your pool, be sure to TURN OFF the Salt Chlorine Generator at the Control Unit. The generator should not be turned on until the salt has completely dissolved. Leave the PUMP ON to circulate the water and help dissolve the salt.
How do you test an IntelliChlor salt cell?
If the flow sensor is built into the cell (Intellichlor), then take your finger and depress the sensor paddle lightly until it makes contact and closes the sensor. After the control box senses flow, it will send power to the cell.
How long does an intellichlor Pentair ic40 last?
That means that the Pentair IC40 life is running out – limited life remaining. Under proper operation, the intellichlor should provide at least 10,000 hrs. of operation, which is 3-5 years of service. In many instances, you can extend the life if you monitor the level of chlorine properly and the salt and chemical balance level.
When does an ic40 salt cell expire?
ic40: When a Salt Cell Lifetime Expires. July 26, 2016July 29, 2019. The intellichlor Salt Cell has a lifetime of approx 10,000 hours. To check this, press and hold the more button for 3 seconds. The lights should scroll through and leave a few of the percentage lights lit up.
How does the intellichlor salt chlorine generator work?
The IntelliChlor Salt Chlorine Generator uses common table salt to produce all the chlorine your pool needs, right in your pool—safely, effectively and automatically. Easy-to-view displays enable fast checking of salt levels, cell cleanliness, sanitizer output and water flow.
When do the LEDs flash on the Pentair ic40?
The 3 salt levels LED’s Red, Yellow, and Green are designed to repeatedly flash for the about 2 minutes after every startup. Hence, wait for about 2½ minutes to allow the Pentair IC40 to properly sense the level of salt. After that, 1 of the 3 LED’s will be illuminated displaying salt level.
