How do I turn my pool vacuum on?

To begin vacuuming, first put the open end of the hose into the vacuum plate, and then put the plate into your pool wall skimmer. It should be right on top of the suction vent. For above-ground pools, slowly move your vacuum back and forth in straight lines over the floor of the pool until it’s clean.

What setting should I use to vacuum my pool?

For routine vacuuming, the filter valve is left in the normal “Filter” position. This directs dirty vacuum water through the pool filter to remove the contaminants, then conveys filtered water through return lines back to the pool. The “Filter” setting is used for light to moderate levels of pool sediment.

What do I set my pool pump to when vacuuming?

To begin vacuuming your pool:

If you have a sand filter and are vacuuming to waste, set filter to “waste” option.
Otherwise, leave setting on “filter” and turn pump on to begin vacuuming.
Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.

When to turn pool Valve in manual mode?

The actuator valves will sometimes fail and you will need to reset the valve position since they will sometimes fail in spa suction mode which will drain down the spa. Other times they will fail in their auto position but if you want to use your spa you will have to manually turn the valve if the toggle switch in the back is not working.

How do you set up a pool vacuum?

Step 1: Assemble your pool vacuum. This is quick and easy to do. Simply attach the vacuum head to your telescoping pole (remember, it should snap on easily). Step 2: Connect the vacuum hose. Attach one end of the hose to the vacuum head and attach the other end to your skimmer using the vacuum plate.

How does a Pentair valve actuator work in a pool?

Valve A rotates to the 80-85% position to divert water from the regular returns to the water feature. I also increase the pump speed. When I turn Feature 1 OFF Valve A rotates the opposite direction to return 100% of the water to the regular returns and the pump speed decreases.

Do you need to use skimmer when vacuuming pool?

Extreme care must be taken when vacuuming a pool through the vacuum outlet so as not to vacuum up large debris that may become lodged in the circulation plumbing. We recommend you vacuum through the skimmer using a vacuum plate and skimmer basket if large debris is a concern. e.)

How to set valves for an in ground swimming pool automatic?

Many pools have suction type cleaners without having a dedicated line for it. This will connect into the skimmer. The valves would be set as skimmer open, main drain closed. Most cleaners come with a skimmer adapter that allow adjustable flow to be able to skim as well as having the cleaner connected.