How do I start my above ground pool for the first time?

How do I start my above ground pool for the first time?

1. Step 1 – Clear off the water, debris and anything else from the pool cover.
2. Step 2 – Remove the pool cover.
3. Step 3 – Pull the winter plugs and accessories out.
4. Step 4 – Top up the water in your pool.
5. Step 5 – Reinstall the pool ladder.
6. Step 6 – Prepare the pool filtration system.
7. Step 7 – Power your filtration system up.

How do I maintain my Intex Easy Setup pool?

7 Tips To Keep Your Intex Pool Clean

1. Always measure the pH value in your Intex pool.
2. Think carefully about where you place your pool.
3. Cover your Intex pool when it is not in use.
4. Only use tap water to fill the pool.
5. Measuring is knowing: be careful with chlorine.
6. When do you choose automatic cleaning.
7. Watch out for dead algae.

How much shock do I need for Intex Easy Set pool?

In addition to your everyday chlorination of your Intex Pool, you may have heard of ‘Shocking the Pool’. This refers to raising the chlorine level above 10 ppm by adding a granular chlorine powder, known as Pool Shock. Add 2 oz. per 1,000 gallons of pool water.

Can you use Intex pool without pump?

Intex has two types of swimming pool — Easy Set and Oval Frame — that require an air pump to set up as they feature an inflatable ring on the top edge of the pool. All other types of Intex swimming pools do not require an air pump.

What do you need for an Intex pool?

Intex pools — the same as with all other swimming pools — require a filter, pump and the appropriate chemicals, such as chlorine, to keep the pool water clean and sanitary for swimmers. Cleaning tools such as brushes, nets and skimmers should be used to keep the sides and surface of the pool free of algae and debris.

How do you clean Intex pool?

Intex pools use a garden hose vacuum. Simply connect a garden hose to the vacuum head; attach the debris bag and turn the water on. The water pressure runs through the debris bag causing suction. With the vacuum head attached to an extension pole, use a sweeping motion to clean the floor of the pool.

What is the best filter for an Intex pool?

If you are planning to convert a swimming pool to salt water pool, then Intex Krystal Clear Sand Filter Pump is the best choice for you. This will keep water soft, clean and refreshing throughout the year.

How to care for Intex pools?

To accomplish this: Drain the pool. A sump pump may be necessary to drain the final few inches of water. Clean the liner with a gentle soap and water solution, and allow it to dry thoroughly. Store the liner in its original box, or in a large container with no sharp edges. Store the poles and connectors separately, to prevent any punctures to the liner during storage.