How do I resync my pool lights?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized. Refer to the included color card as a quick reference to the available programs.
Why is my Pool Light not turning on?
If the GFCI does not trip but the light is still not turned on, the most likely problem is a burned-out bulb. In both cases, you need to pull the fixture from the pool in order to continue your troubleshooting process.
When to fault test a pool light fixture?
If your GFI or GFCI is tripping when you turn on the pool or spa lights a light fixture probably has a fault to ground as water has invaded the cord seal. You can sometimes see water or condensation on the light lens. If there are multiple lights this can help determine which fixture is bad.
What’s the best way to replace a pool light?
Learn how to replace a pool light with Step-by-step instructions. Aquaquip LED replacement lights are easy to fit, they are multi voltage lights (12v, 24v, 30v) which means you will not need to change your transformer. The new Quick Connection Plug makes fitting these pool lights very easy. There is no need to drop the water level in the pool.
Which is the best Hayward led pool light?
Hayward ColorLogic LED pool light died so replaced it with IntelliBrite Color LED pool light from Pentair. Before switching brands, I contacted Hayward to ask if they improved the service life on the ColorLogic 2 series and I wasn’t impressed with their response. The color logic was great while it lasted.
Why does my Pool Light need to be replaced?
Replacing a pools light lens gasket is pretty simple and even the more novice pool owners can do the job. Another less likely cause of a pool light fixture leak is a power cord conduit seal leak. If the conduit seal degrades to that point, the light is likely dead and will require replacement.
How much does it cost to replace a pool light bulb?
And being the stand-up company that we are, we would replace the entire pool light fixture at no additional cost to the customer and lose money while doing so. A pool light bulb retails for about $30-40. A new pool light gasket for the fixture is about $25. Labor for the repair would be $100-150.
Why does my Pool Light keep tripping?
Sometimes, a little bit of water can get inside the light fixture. The light heats the water, which evaporates. This will cause the GFCI to trip. humidity alone can cause this breaker to trip because it’s designed to be very sensitive.
Is there a warranty on pool light bulbs?
And for the record: we will only replace bulbs for customers we have on our weekly pool service route and we can only offer a 30 day warranty. And, we specifically inform them that we cannot warranty the light if it leaks (many customers opt for replacing the entire fixture and getting the warranty).
