How do I reset my UV Sundance spa?
Nigel
- Press and hold the Jets pump 1 and Cooler button at. the same time for 3 seconds.
- Press the Warmer button until the display shows “0.”
- If the counter has reached “0”, pressing the Jets pump 1.
What does the clear ray bulb do?
WHAT IS CLEARRAY®? The CLEARRAY® System uses exclusive UV-C technology to neutralize 99.9% of waterborne pathogens that you cannot see so your water will be fresh and clean, without the uses of gasses.
Does clear ray really work?
Within seconds, the UV-C light rays can neutralize up to 99.9% of all waterborne pathogens and contaminants. Since you won’t be using as many chemicals to sanitize your water if you adopt the CLEARRAY®, you will also benefit for a more environmentally-friendly solution.
Where is the red light on a Sundance spa?
The indicator light located on the front cabinet panel of the spa is an early detection system that will notify you when the spa needs immediate attention. A solid white light indicates that all operations are normal. A solid red light indicates that immediate attention is required to clear or fix an error code.
What are the functions of a Sundance Hot Tub?
There are a number of unique functions designed into your Sundance hot tub to protect it from damage and/or to aid in troubleshooting. The indicator light located on the front cabinet panel of the spa is an early detection system that will notify you when the spa needs immediate attention.
What is the error code on the Sundance Spa hot tub?
Sn1 Error Code: Heater is deactivated. High-limit sensor located in the heater drywell is nonfunctional. Sn3: Heater is deactivated. Main temperature sensor located in filter bucket is nonfunctional. 6. ILOC Error Code ILOC Error Code: Hot Tub is deactivated.
Why is my UV bulb not working on my Sundance Spas?
CLOSED or SHORTED FLOW SWITCH ON SYSTEM STARTUP (system disabled) Flow switch is non-functional. This must be repaired only be a Sundance Spas dealer or qualified service technician. UV bulb needs to be replaced. The message will flash between “blb” and the water temperature.
The indicator light located on the front cabinet panel of the spa is an early detection system that will notify you when the spa needs immediate attention. A solid white light indicates that all operations are normal. A solid red light indicates that immediate attention is required to clear or fix an error code.
What to do if your Sundance Spa hot tub is not working?
If condition persists, contact your Sundance Spas dealer or qualified service technician. If the hot tub water is more than -7C cooler than the temperature set point, jets pump #1 and heater will automatically activate to provide freeze protection.
There are a number of unique functions designed into your Sundance hot tub to protect it from damage and/or to aid in troubleshooting. The indicator light located on the front cabinet panel of the spa is an early detection system that will notify you when the spa needs immediate attention.
How can I tell if my Sundance spa filter is defective?
The only way to test this is to make sure there is no loose debris in the spa, then pull the filter out and see if the flow error goes away, if it does, it is the filter. 2. Defective Circ Pump or Flow Switch: Need to check for Circ Pump operation.
