How do I reset my t15 salt cell?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
When to add salt to a salt cell?
If value is not reading within 500ppm of independent test, then replace cell. If number is reading within 500ppm of the independent test and the ‘Inspect Cell’ LED is flashing, add salt until level is above 2700ppm. The ‘High Salt’ LED will be ON when the cell amperage is above the maximum limit.
How to troubleshoot problems with your salt cell?
Starting with the average salt reading. Turn the switch to ‘Off’, then back to ‘Auto’. Wait for the relay to click (about 5 to 10 seconds). Press the ‘Diagnostics’ button 5 times, this will bring up the instant salt reading.
When do I reset the average salt level?
How to Reset Average Salt Levels. The Average Salt level needs to be reset for start up, when a board is replaced, when major adjustments are made to the pool water, and when a cell is replaced. Note: new boards will display a factory default of 2800ppm. Step 1: To reset, move the switch to ‘Off’ and then back to ‘Auto’.
When does the check salt and inspect cell flash?
The ‘Check Salt’ & ‘Inspect Cell’ LEDs will flash when the cell reports the salt level is between 2400 – 2700ppm. In this condition chlorine is still being produced. The ‘Check Salt’ & ‘Inspect Cell’ LEDs will be ON when the cell reports the salt level is 2300ppm or less.
What can I use as a replacement salt cell?
Our Platinum Edition replacement salt cell is a great alternative replacement to the OEM salt cell. This unit is compatible with Goldline, Aqua Rite, AquaLogic, Mineral Springs, NatureSoft and Swimpure salt water chlorine generator systems.
What kind of electrodes do Hayward aquarite T-cells use?
High Performance Electrodes – Our Platinum Edition cells all use high performance long life Titanium electrodes with a specially formulated Platinum and Iridium coating. Eco Friendly – Salt cell pools require less chemicals and eliminate the need for liquid chlorine.
Starting with the average salt reading. Turn the switch to ‘Off’, then back to ‘Auto’. Wait for the relay to click (about 5 to 10 seconds). Press the ‘Diagnostics’ button 5 times, this will bring up the instant salt reading.
What happens when you use a Hayward salt cell?
You will no longer have to haul around heavy buckets and jugs of harsh chemical chlorine. No need to constantly test and adjust your chemical composition. When you use the Hayward Salt Cell everything is done automatically — the TurboCell converts ordinary dissolved salt into chlorine while you go about your life.
