How do I reset my ScreenLogic protocol adapter?
You can use a paper clip to reset the Protocol Adapter by pressing the recessed reset button. You canunplug and plug back in the wireless router to reset it.
Where do I find the control panel for intellitouch?
Conveniently located in a weather-protected location in the home you will find the Indoor Control Panel. This is your primary means of controlling the IntelliTouch system. It consists of an easy-to-read LCD display, 10 status LED’s, 10 side buttons, and 5 lower buttons.
How does intellitouch control a pool and spa?
First is the Power Center which is installed at your pool equipment and contains all the electrical circuitry. Second is one of the “Personality Kits” you select based on whether you want to control a separate pool or spa, a pool/spa combination with shared equipment or a pool/spa combination with separate equipment.
Do you have to be licensed electrician to use intellitouch?
1. All work must be performed by a licensed electrician, and must conform to all national, state, and local codes. 2. Install to provide drainage of compartment for electrical components. 3. If this device is used to control underwater lighting fixtures, a ground-fault interrupter (GFCI) must be provided for these fixtures.
Can a wireless controller be used for pool control?
Plus, you can use a MobileTouch® Wireless Controller or add an optional ScreenLogic Interface to access your pool remotely using many popular mobile digital devices IntelliTouch systems sense conditions that could hamper operation and alert you to these situations or take automatic corrective action.
Conveniently located in a weather-protected location in the home you will find the Indoor Control Panel. This is your primary means of controlling the IntelliTouch system. It consists of an easy-to-read LCD display, 10 status LED’s, 10 side buttons, and 5 lower buttons.
What does intellitouch do for pool and spa?
With its intelligent electronic circuitry and simple programmability, IntelliTouch makes operating and maintaining your pool and spa incredibly easy and absolutely worry free. With IntelliTouch in control, your pool and spa will operate with peak efficiency and economy-automatically.
Where is the load center on an intellitouch pool?
Rev. C 5-22-03 5 P/N 520102 At The Equipment Pad Near the pump, filter, and other equipment will be located a large metal box known as the Load Center. This is where high voltage from the house is distributed to the various pool equipment. This is also where the Indoor Control Panel interfaces with the other equipment.
Where is the terminal bar located on intellitouch?
A terminal bar stamped is located inside the supply terminal box. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous copper wire equivalent in size to the circuit conductors supplying this equipment (no smaller than 12 AWG or 3.3mm).
