How do I reset my LCI leveling system?

How do I reset my LCI leveling system?

Resetting Lippert Ground Control Leveling System After Dead…

1. In manual mode, run the jacks to level the trailer.
2. Once the trailer is level, turn off the touch pad.
3. With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times.

How to clear error on Lippert ground control leveling system?

Extend all jacks at least 6 inches. Then press and hold the retract button until the jacks begin retracting. All of the jacks should fully retract and clear the error. If you have a 6-point system the middle jacks only operate in error mode.

What should I do if my leveling jacks are not working?

Silicones and cleaning agents such as Dawn dish soap can worsen the corrosion and render your system irreparable. So what you should do is spray the system well with WD-40 and then wipe clean.

How to control the LCI leveling system in a RV?

Push the “REAR” button to extend the middle and rear landing gear legs. Push the “LEFT” button to extend the driver’s side middle and rear jack. When pressing this button the middle jack will extend first then the rear. Push the “RIGHT” button to extend the passenger’s side middle and rear jack.

What kind of leveling system does a Winnebago Brave have?

Have a 2004 Winnebago Brave with the HWH 325 series Leveling System. While driving the yellow ‘Jacks Down’ indicator light turned on and buzzer sounded, pulled over and found the LR jack was down about 1/4 inch with the round RF jack indicator on the keypad was ‘red’.

What happens when leveling jacks don’t Retract?

When this happens you can’t safely move the RV, and you’re essentially stuck at your campground or RV park. If the leveling jacks won’t retract there are several things that can cause a problem with an RV’s leveling jacks.

Is there a problem with Lippert leveling jacks?

The following questions and examples can help you troubleshoot a problem with sometimes more complicated Lippert Systems leveling jacks. Time out errors is not uncommon with malfunctions that apply excess force on the system.

Why does my RV leveling system not work?

RV Leveling system responds to the designated built-in switch that it comes with. It may get damaged between your trips. If that’s the case you need to replace the switch as soon as possible. The leveling system will not work without the switch. Lippert Components Power Switch comes to rescue you from that hassle.

Who are the manufacturers of RV leveling jacks?

While most RV leveling jack systems are made by HWH Corporation, there are some other options which might be on your RV. Lippert Systems are a competitor brand in this niche and they tend to operate a little differently.