How do I reset my LCI controller?
Press “home” button to turn on transmitter. Then press and release “home” button 5 times. Then press “config”. The screen will ask you if you want to reset the screen lock PIN code.
How do you manually level LCI electronic leveling?
You can do this by simply turning your system on and pressing the “FRONT” button. Have the pad soaped up and aligned properly under your jack and continue to press the button until you hear the “snap”. Once the front two pads are installed, you can unhitch and enter manual mode in your LCI Level Up® System.
What does error out of stroke mean?
If you get the Out of Stroke error message on the Lippert Ground Control system, such as # LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in the system at least 6 inches.
How do you get rid of stroke error?
To clear the error you can extend all of the jacks in the system at least 6 inches. Then press and hold the retract button until the jacks start to retract. All of the jacks should fully retract and the error should be cleared.
How do you turn off LCI in electronic leveling?
When the “JACKS DOWN” message on the LCD display goes off, press the ON/OFF (power) button to turn the leveling system off. A. Do a visual inspection around the coach to verify all jacks are fully retracted.
How to clear retract time out return levelers error on LCI?
I had a retract timeout error and I did what you said to clear it then after I did that I now have a right up error message and the right front and back light is illuminated red. How do I clear that? If the touch pad is showing “Retract Time out Return Levelers for service” all you need to do is hit, enter and retract at the same time.
How to clear error code on Lippert ground control leveling?
Here is the recommended procedure for clearing the error code: Extend all jacks at least 6 inches. Then press and hold the RETRACT button until the jacks begin retracting. All of the jacks should fully retract and clear the error.
How does the Lippert electronic leveling system work?
The Lippert Electronic Leveling System is an electric/hydraulic system. A 12V DC electric motor drives a hydraulic pump that moves fluid through a system of hoses, fittings and jacks to level and stabilize the coach. The Lippert Electronic Leveling System is totally integrated into the chassis of the coach at the manufacturer.
