How do I reset my Jetsetter hot tub?
Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell. If the water temperature in the thermowell is the same as the water temperature in the rest of the spa, the switch is damaged and needs to be replaced.
Where is high limit reset on hot tub?
The High Limit Switch Needs to Be Reset or Replaced Or it might need a reset from time to time for no known or serious reason. Simply reset by pressing the big red button on your spa pack. The high limit switch may be housed in a thermowell.
How long does it take for a hot tub pump to come on?
Make sure that a rodent has not chewed through the cable. NOTE: When you unplug the topside control from the circuit board, the low speed/filter speed should come on in approximately one minute. If it does not, then either the pump or the circuit board is faulty.
What to do when your hot tub is not in use?
Always keep your hot tub covered when not in use to keep debris out and to more efficiently maintain water temperature. Keep detergents and soaps out of your spa by showering with water only before getting into the hot tub.
Why does my hot tub keep Tripping the circuit board?
If the GFCI holds, then you have found the cause of the GFCI tripping. It will need to be replaced. If you have everything unplugged (including the main pump) and it still trips, then there may be an issue with the transformer that is soldered or plugged into the circuit board. If the transformer plugs into the board it can be easily replaced.
Where can I buy parts for my hot tub?
Purchase authorized Hot Spring parts from your dealer to ensure that you’re outfitting your spa with quality, lasting components. Keep your spa’s serial number on hand in case you need to reference it for more troubleshooting advice or official parts and repairs.
What can I do if my ThermoSpas hot tub is not working?
If you reach the point of having no luck with keeping your water in balance, and have tried draining and refilling your tub, you can send us a sample of your hot tub water for analysis. Please contact ThermoSpas Customer Care Department at 800-876-0158, option 2. What can I do if the pH is my spa is high (over 8.0) and will not come down?
Can you use ThermoSpas jet line cleaner in a hot tub?
The use of ThermoClear™ and Chlorine can be interchanged in the same spa water. All other sanitizers require the draining of the hot tub. It is recommended to use the ThermoSpas ® Jet Line Cleaner for cleaning out the lines. Why can’t I use swimming pool chemicals?
Make sure that a rodent has not chewed through the cable. NOTE: When you unplug the topside control from the circuit board, the low speed/filter speed should come on in approximately one minute. If it does not, then either the pump or the circuit board is faulty.
If the GFCI holds, then you have found the cause of the GFCI tripping. It will need to be replaced. If you have everything unplugged (including the main pump) and it still trips, then there may be an issue with the transformer that is soldered or plugged into the circuit board. If the transformer plugs into the board it can be easily replaced.
