How do I reset my Intex hot tub?

How do I reset my Intex spa?

Locate the spa’s high-limit reset. This is a red button found on many spa packs.
Press the high-limit reset button.
Turn on your spa and observe its operation.
Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.

Why does my Intex hot tub heater keep shutting off?

So, why does my hot tub keep tripping and turning off? The problem could be due to a worn GFCI breaker, moisture or corrosion inside the breaker box, damaged or loose wiring, or malfunctioning components. It could even be down to a bad heating element or a flooded blower.

Why is my Intex hot tub saying E90?

The E90 code on the Intex spa is due to a dirty water flow sensor. Remove the control panel and all the screw holding the casing on. In the white plastic piece on the discharge, top hose, you will see a silver nut with a black wire coming from it.

Why is my Intex inflatable hot tub not working?

If your Intex PureSpa inflatable hot tub displaying an alarm error code E94 on the control panel, it means the water temperature of your hot tub is too low. If Intex hot tub error code E94 appears, unplug your hot tub and plug back into the GFCI/RCD plug and restart the hot tub when the spa water temperature is higher than 39ºF.

What are the error codes on the Intex purespa?

There are several error codes you might see on your Intex PureSpa inflatable hot tub like e90, e94, e96, e95, e98, e99. If you are facing any of these error codes, don’t worry our full error code troubleshooting guide will help you to solve all these error codes.

Why is my Intex water pump error 90?

This feature is not available right now. Please try again later. 2/22/20 UPDATE: Error 90 results from a sensor detecting lack of water flow. There are two well-known causes for flow problems: clogged filters and a broken water pump.

How to solve Intex purespa hot tub error code E90?

For solving this problem all you have to do is following these steps: 1 Clean the filter cartridge of the hot tub or replace it with a new one. 2 If E90 persists, check and ensure there is no debris inside the spa tub inlet and outlet grids. 3 Make sure the spa water is clean and sanitized.

Why is my Intex hot tub throwing an error code?

If your Intex hot tub pure spa throwing an error code of E99 it means that your hot tub experiencing an internal error. If you want to solve this error all you have to do is go and check your hot tub by the nearest Intex customer service executive.

Where is the reset button on an Intex hot tub?

Intex hot tub’s RESET button is located on the side of the spa control panel. If you facing any error code press the reset button and restart the unit. If you are facing any problem or issue with your Intex hot tub or your Intex hot tub throwing any error E90, E94, E95, E96, E98, or E99.