How do I reset my Hot Springs heater?

How do I reset my Hot Springs heater?

How do you reset the heater on a Hot Springs Spa?

1. Locate the spa’s high-limit reset. This is a red button found on many spa packs.
2. Press the high-limit reset button.
3. Turn on your spa and observe its operation.
4. Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.

What kind of hot spring heater do I Need?

The No-Fault PDR Titanium Heater is the hybrid achievement in spa heating from the makers of Hot Springs spas. Its double-pass sleek design efficiently heats the water in a corrosion resistant titanium housing! Now factory approved and warranted for all 115 volt and 230 volt replacement on all 1995-Now Hot Spring and Tiger River spa models!

Where can I find the hot spring owner’s manual?

Please keep this manual available for reference. If you have any questions about any aspect of your spa’s set-up, operation or maintenance, contact your authorized Hot Spring dealership. They are trained professionals who are familiar with the product as well as new spa ownership concerns.

What are the dangers of installing a hotspring tempo?

DANGER: RISK OF ELECTRICAL SHOCK • Install at least 5 feet (1.5 m) from all metal surfaces.

What to do if your hot spring is not working?

If either of the interrupters does not perform in this manner, it is an indication of an electrical malfunction and the possibility of an electric shock. Disconnect the power until the fault has been identified and corrected.

Is the Hot Spring Classic a 115 volt heater?

1980-1994 Hot Springs heater elements, gaskets, housing and related parts. Factory replacement parts for the 115 volt heater (aka 110 volt) used in the Hot Spring Classic, Home Spa, Personal Spa, Jetsetter, Prodigy, Indoor-Outdoor and Sovereign spa models prior to 1995.

When did hot springs start using no fault heaters?

Replacement heaters and related parts for all 1995-now Hot Springs spa models. Hot Springs replacement heaters for all 1995-now spa models. In 1995 Watkins introduced the first No-Fault heater. The name “No-Fault” means that there is no longer any mention of negligent water chemistry voiding the warranty.

When to replace a hot spring hot spring heater?

Replacement heater for all 110 volt 1980-1994 Hot Spring spa models. 1980-1994 Hot Springs heater elements, gaskets, housing and related parts. Factory replacement parts for the 115 volt heater (aka 110 volt) used in the Hot Spring Classic, Home Spa, Personal Spa, Jetsetter, Prodigy, Indoor-Outdoor and Sovereign spa models prior to 1995.

Can a 1988 hot spring be plugged into a 1988 Heater?

(Ref. #11) The heater cord adapter allows one to plug the current replacement heater element into the pre-1988 Hot Spring control box receptacle. The original control box heater receptacles (standard household style) will not accept the current plug configuration (square) used on the 31255 replacement heater elements.