How do I reset my Hayward Turbo Cell?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
How to check salt level on Hayward Aqua rite Turbo cell?
Press the “right” button again until an “Instant Salt” option appears. Your final step will be to press the “+” button directly on your unit, which should display your pool’s true salt level.
Where can I find the Aqua rite diagnostics manual?
Aqua Rite & Aqua Rite XL Diagnostics Manual AQUA RITE ELECTRONIC CHLORINE GENERÀTOR CELL Turbo Cell & Control Electronics Software Revision 1.50 O HAYWARD Copyright 2009 Hayward Industries Inc.
What’s the best way to troubleshoot an aqua rite cell?
(GLX-CELLSTAND) Step 1: Use a water hose to dislodge small debris. Step 2: Use a non-metal (plastic or wood), non-abrasive tool to dislodge minor calcium buildup and small debris. Step 3: Use a solution of water and Muriatic acid. Stand the cell vertically in the solution. M’x 1 part acid to 4 parts water.
How to set Turbo cell type before Operation?
How To Set Turbo Cell Type Before operation, the Aqua Rite must be configured for the chlorinator cell that will be used. “t-15” is the factory default. If the incorrect cell is chosen the salt level, amperage, and voltage will not be correct and the system will turn the chlorinator off. Slide the Main Switch to the “Auto” position. Super.
Why is my Hayward Aqua rite Turbo cell not working?
This will lock that number in as the new average salt reading. If the salt system settles on a number that is unrealistic, there may be something wrong with your system or salt cell. The most likely issue is that your salt cell needs to be replaced. It could also be that the board in your power center needs to be replaced.
Where can I get a new Goldline Aqua rite salt cell?
Replacement turbo salt cell for the Goldline Aqua Rite salt chlorinator from Hayward, Hayward replacement part number T-CELL-15. Low flow conditions can result in insufficient water in the cell causing inefficient chlorine production. As a precaution, the cell can be installed vertically or in an inverted manner
(GLX-CELLSTAND) Step 1: Use a water hose to dislodge small debris. Step 2: Use a non-metal (plastic or wood), non-abrasive tool to dislodge minor calcium buildup and small debris. Step 3: Use a solution of water and Muriatic acid. Stand the cell vertically in the solution. M’x 1 part acid to 4 parts water.
