How do I reset my Hayward Pool light?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized. Refer to the included color card as a quick reference to the available programs.
Why is my LED pool light flashing?
If your pool light bulb is flickering or turned off and the housing is still dry, it may be that the bulb just needs replacing. Be careful, though, because if the bulb isn’t lasting as long as it should that is an indicator of a much worse problem such as a power surge or some faulty wiring somewhere.
How do Hayward ColorLogic lights work?
The Universal ColorLogic/CrystaLogic light is controlled through power-cycling: a method of changing light programs which requires no special controller or interface. To activate the light, simply turn on the switch. To deactivate the light, turn off the switch.
How long do Hayward ColorLogic Lights last?
50,000 hours
The life expectancy for a Colorlogic light is 50,000 hours. The light will perform for over 10,000 hours without any noticeable loss of brightness.
How many pool lights can I control with colorlogic?
•The ColorLogic Network Module can be used to control up to 32 pool or spa lights simultaneously. This method of control features 2 user defined programs; five fixed colors and eleven color-changing shows. All fixed colors and shows can be modified or changed.
How do you programming colorlogic Pro Logic Control?
Programming the ColorLogic lights takes place within the Settings Menu of the Pro Logic control. To enter the Settings Menu, push the “Menu” button until “Settings” is displayed. Push the “<” or “>” buttons until the desired Aux is displayed then follow the sequence described on the following pages. Light Show Programming
Is there a way to reset colorlogic lights?
The ColorLogic lights configuration can be reset if desired. Use this procedure when: -adding a light to the system -removing a light from the system -re-assigning a LT number to an existing light In the configuration menu, Initiate reset of all ColorLogic configuration parameters by pressing the + key
•The ColorLogic Network Module can be used to control up to 32 pool or spa lights simultaneously. This method of control features 2 user defined programs; five fixed colors and eleven color-changing shows. All fixed colors and shows can be modified or changed.
Programming the ColorLogic lights takes place within the Settings Menu of the Pro Logic control. To enter the Settings Menu, push the “Menu” button until “Settings” is displayed. Push the “<” or “>” buttons until the desired Aux is displayed then follow the sequence described on the following pages. Light Show Programming
The ColorLogic lights configuration can be reset if desired. Use this procedure when: -adding a light to the system -removing a light from the system -re-assigning a LT number to an existing light In the configuration menu, Initiate reset of all ColorLogic configuration parameters by pressing the + key
