How do I reset my Hayward AquaRite salt generator?

To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.

How much does it cost to replace a salt cell?

Replacing the salt cell costs $700–$1100. Replacing the control board costs $500–$900. You can extend the lifespans by maintaining a consistent salt level, cleaning the cell only when needed, and using the reverse polarity function.

Do you need a salt chlorine generator for Hayward pool?

Just like any other salt chlorine generator, the Aqua Rite may need a quick ‘tune up’ from time to time. Using information provided by Hayward Pool, we have created the following troubleshooting guide to help pool owners understand the diagnostic codes and quickly restore their Hayward Aqua Rite salt chlorination system. Important Tips!

Why do I get error code on my salt chlorine generator?

Seeing as this is a salt chlorine generator, one of the most frequent error codes you will see will have to do with your salt levels or the cell where the salt is produced. And because one directly affects the other, both lights will appear when there is an error concerning the salt levels. Let’s dig a little deeper.

When do You Know you need a new salt chlorinator?

-If the problems continue to exist, or the panel keeps going back to the old, incorrect number, it most-likely means that you need a new turbo cell. Another indication of a bad cell is when the control panel is displaying “HOT”, when the actual temperature of the pool/spa is at normal operating temperature.

How to troubleshoot your Hayward Aqua rite salt system?

Troubleshooting and diagnosing their problems. If you’re reading this blog that means you need help troubleshooting your Hayward Aqua Rite salt system. Well, the good news is you are at the right spot and you’re definitely not alone. This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward.

Why is the high salt light on on my Aqua rite?

High Salt LED is also on if the control is set for the wrong Turbo Cell type. The LCD screen will read “HI”. Verify that the salt level is 2700 – 3400 ppm. We recommend that you check the salt level with a water test kit to ensure accuracy.