How do I reset my Hayward Aqua Rite?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
How do you clear the check system on Pro Logic?
Turn the filter pump on. You must reset the system by entering the ‘Diagnostic Menu’ and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.
What to do if your salt cell chlorinator is not working?
If the control panel has no indicator lights, that’s a good sign of no power. Check for a tripped circuit breaker or GFCI outlet test button. Many salt chlorinators also have a fuse inside the cabinet, designed to blow in the event of power overload, or a lightning strike.
How to turn off super chlorinate in ProLogic flow control?
To display the settings, press the Menu key until Settings Menu appears. Then press the > until Super Chlorinate appears . Use the (+) or (-) button to toggle between super chlorinate On or Off depending on preference. Then press the (>) one time to display chlorinator % options. Step 2
What can I do if my salt cell is not working?
If you are handy with a soldering tool, circuit board components can be replaced. 5. Check Amps on Salt Cell: Using a clamp-on amp meter, you can test the amperage of the salt cell, to be sure it matches the label on the controller, or the owner’s manual specs.
If the control panel has no indicator lights, that’s a good sign of no power. Check for a tripped circuit breaker or GFCI outlet test button. Many salt chlorinators also have a fuse inside the cabinet, designed to blow in the event of power overload, or a lightning strike.
When to turn off the chlorinator in a pool?
Check System Light On: Cell Power Error Message Verify the system is configured for correct model cell. (Page 18). If the incorrect cell is chosen, the system will inaccurately interpret the salt level in the pool and the system may turn the chlorinator off. Maximum Current (Amps) before shutdown Page 10 3.
What does it mean when there is no cell power?
‘No Cell Power’ means the current chlorinator cycle has been interrupted due to no voltage being detected when the cell power relay was turned on. Page 3 Check System Light On:
What does ” chlorinator off low temperature ” mean?
‘Chlorinator Off Low Temperature’ means the current chlorinator cycle has been interrupted due to a cell temperature reading of less than 50°F. ‘Chlorinator Off High Temperature’ means the current chlorinator cycle has been interrupted due to a cell temperature reading of more than 140°F. Page 14 Check System Light On:
