How do I reset my Hayward Aqua Plus?

Turn the filter pump on. You must reset the system by entering the ‘Diagnostic Menu’ and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.

How do you unlock the configuration menu on Hayward Aqua Plus?

Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep).

How do you turn on a Hayward Aqua Plus?

Turn power on at the main panel and turn the Aqua Plus control power circuit breaker on. The keypad will show the default display. The default display alternates between the day/time, air and pool (or spa) temperature, pool/ spa sanitizer setting, and salt level.

How do you calibrate a Hayward Goldline Aqua plus salt system?

The calibration screen will start counting down from a higher salt reading than what the actual level in the pool water is. Once you see your salinity level, push the switch up to “super chlorinate” and then immediately back down to the “Auto” position. It is now calibrated.

How do I know if my Hayward Turbo is working?

The easiest way to be certain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights on the chlorinator box. When operating, you should also see bubbles (hypochlorite gas) inside the chamber, producing what looks like cloudy water – that’s chlorine being created!

What does chlorinator off no cell power mean?

‘No Cell Power’ means the current chlorinator cycle has been interrupted due to no voltage being detected when the cell power relay was turned on. Page 4. Turn off power to the controller.

How long should you super chlorinate a salt water pool?

If there has been a large number of swimmers in the pool or the pool water is cloudy, you can put the Aqua Rite™ chlorinator into “Super Chlorinate” mode where it will automaticially generate the maximum amount of chlorine for 24 hours.

What do you need to know about Hayward Aqua plus?

The Hayward Aqua Plus is a multifunction pool controller used to fully manage your pool/spa system. The Aqua Plus can control pumps, valves, lighting, heaters, and chlorination. Although the Aqua Plus is easy to use, it is important to completely read through this operating manual before

How to troubleshoot your Hayward Aqua rite salt system?

Troubleshooting and diagnosing their problems. If you’re reading this blog that means you need help troubleshooting your Hayward Aqua Rite salt system. Well, the good news is you are at the right spot and you’re definitely not alone. This blog is an in-depth look at the Aqua Rite and Aqua Rite XL diagnostics manual created by Hayward.

What are the warranties for Hayward pool automation?

Command pool automation products as well as its Aqua Rite, Aqua Rite Pro, Aqua Plus and SwimPure chlorination products to be free of defects in materials and workmanship, under normal use and service, for a period of three (3) years. Hayward also warrants its Aqua Trol chlorination products to be free of defects

What should the salt level be in my Hayward pool?

Push the diagnostic button until “T-XX” appears on the display. Step 2: Verify the accuracy of the salt readings (2700-3400 pm) with an independent test kit or by taking a water sample to your local pool store for testing. 3200 ppm is the ideal level. If the salt level is below range, add enough salt to achieve a salt level of 3200 ppm.

Is the salt level on the Hayward Aqua plus wrong?

I have a hayward aqua plus controller which is not showing the proper salt levels; however, when I bring a water sample in the pool store – my salt level is correct. The controller is about 2000 PPM off so it is never producing chlorine. I have tried a new salt cell but the same result.

How does Hayward Goldline all in one pool work?

It takes the work out of owning a pool and spa by automating all essential pool and spa functions, water chemistry with Sense and Dispense, salt chlorination, custom light shows with ColorLogic LED lights and other backyard features like water features, lights and sprinklers.

How long is warranty on Hayward Goldline salt?

In order to get the three year warranty honored, you have to get a Hayward-certified service center test the cell and get authorization for a warranty swap. Then, to add insult to injury, the warranty replacement will only have a one year warranty.