How do I reset my Greystone electric fireplace?
It sounds like your Greystone # 324-000075 fireplace kicked into automatic shutoff mode- which occurs when too much heat builds up. In order to reset the fireplace you’ll need to turn off all of the functions, unplug it and let it sit for 10-15 minutes (which might require un-mounting the unit to access the plug).
How do I turn on my built in electric fireplace?
To use the flames on an electric fireplace:
- The fireplace must be plugged in at the wall and the wall socket turned on.
- The power button on the electric fireplace must be switched on.
- The flame effect switch must be turned on (if separate to the main power switch).
What does E1 mean on electric fireplace?
Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.
Why does my electric fireplace says EC?
IMPORTANT: Under normal operation, when power is interrupted from either an outage or from unplugging unit from wall while still in operation, error code “EC” may appear on the LCD control panel and the unit will cease operation.
Why did my Greystone electric fireplace quit working?
Please try again later. The Greystone Electric fireplace in my RV quit at precisely the wrong time on the first really cold night we had. After some troubleshooting, I discovered that the fan was moving too slow to adequately cool the heating element. This was causing the thermal switch to open and disconnecting power from the heater and fan.
Who is the seller of Greystone energy systems?
Greystone Energy Systems (Greystone), the seller of the products described, believes that technical information; specifications, test results, and recommendations herein are correct but do not guarantee their accuracy or completeness.
How to reset a Greystone House circuit breaker?
Turn all controls off, unplug the appliance, allow to cool for at least 10 minutes, then plug back in and restart Reset house circuit breaker. Turn all controls off, unplug the appliance, allow to cool for at least 10 minutes, then plug back in and restart.
What should I do if my electric fireplace is not working?
Turn your electric fireplace off at the unit, and turn it off and unplug the power cable at the wall socket. Leave the fireplace for a period of time to cool down, and then try using it again. Ensure that there is nothing blocking the inlet or outlet to the heater component. Ensure that the electric fireplace heater is clean and dust free.
Please try again later. The Greystone Electric fireplace in my RV quit at precisely the wrong time on the first really cold night we had. After some troubleshooting, I discovered that the fan was moving too slow to adequately cool the heating element. This was causing the thermal switch to open and disconnecting power from the heater and fan.
Who are the members of Greystone Power Corporation?
Members have a new real-time cash only payment option. It’s a fast and convenient way to pay your GreyStone bill through the… Local students selected by… Isaac Breiding of Douglasville, Nathaniel Jose of Villa Rica, Olivia Noble of Dallas, Marissa Sandoval of Dallas and Jasmine Walker of Villa Rica…
Turn all controls off, unplug the appliance, allow to cool for at least 10 minutes, then plug back in and restart Reset house circuit breaker. Turn all controls off, unplug the appliance, allow to cool for at least 10 minutes, then plug back in and restart.
Is the Greystone Power Company under a storm warning?
As the storm continues to move through our area, the majority of our service area is under a flash flood and/or severe thunderstorm warning. We…
