How do I reset my Bullfrog spa?

You can often reset the spa unit by pressing the “jets” button. Means that the temperature of the water is unknown. When the pump has been running for a total of 1 minute, the temperature is displayed.

What does cool mean on my hot tub?

Misty the COOL message is normal on a fresh fill of a Sundance spa. The COOL message will go away when the spa water temperature reaches within 15 degrees of your set temperature so if you are set for 104 the COOL message will go away when you attain approx 89 degrees.

How fast does a Bullfrog spa heat up?

If your hot tub is located inside, and the air temp is around 76 degrees, it will take about 4 hours to heat up your spa to 100 degrees. The lower the outside temps the longer you will have to wait before your spa is ready. Therefore, by leaving the cover on while it’s heating up you can help it warm up faster.

How do I cool my spa water?

Lower the Water Temperature Your hot tub temperature usually hovers around 100 degrees, so dial down the temperature to 85 degrees to cool off the water. If the outside temperature permits, feel free to turn off the heater altogether.

Can you turn the temperature down on a hot tub?

Most hot tub panels will allow you to drop the temperature to about 60° F, which is considered cold water by most. But as we got into above though, the actual water temp isn’t likely to get that cold if it’s hot outside. Dropping the panel to 60° F turns your hot tub into a cooling spa that can aid in muscle recovery.

What do the error codes on a bullfrog spa mean?

These are the error codes and display messages that a Bullfrog Spa may display, along with what they mean and the action required: There will be many messages and alerts that appear on the main screen during your ownership. Many of them may be displayed in sequence. You can often reset the spa unit by pressing the “jets” button.

What should water temp be in Bullfrog hot tub?

Open the cover for several minutes, long enough to allow the water to cool down. Repeat a couple times weekly as necessary. For safety reasons, never leave your spa unattended with the cover open. If OHH is displayed on the control panel, this means that the thermometer has detected spa water temperature above 110 degrees F.

What does spa mean on Bullfrog Water Heater?

All of the water devices are then activated. The pumps may cycle on and off in some cases, and the heater may function during Freeze Protection. This is not an error indication but an operational message. Means the spa system has detected that the water temp is 110°F (43.3°C) or more, thus disabling spa functions.

What does oh ohh OHS mean in a hot tub?

OH, OHH or OHS (o verheat) all mean that a temperature sensor has detected unsafe water temperatures of 108° – 118° F, and your spa is in an emergency cool down mode. The heater is shut off, and the circulation pumps and blower are turned on to help dissipate heat.

Where can I buy a new Bullfrog hot tub cover?

You can Order your new Bullfrog Replacement Hot tub cover here. There will be many messages and alerts that appear on the main screen during your ownership. Many of them may be displayed in sequence. You can often reset the spa unit by pressing the “jets” button.