How do I reset my Bullfrog hot tub?
You can often reset the spa unit by pressing the “jets” button. Means that the temperature of the water is unknown. When the pump has been running for a total of 1 minute, the temperature is displayed.
Why is my Bullfrog hot tub making a burning noise?
If your spa pump is creating a burning smell or making excessive noise, the pump motor is defective. This can happen when running the pump during high ambient outside temperatures or due to excessive run times. Please contact your authorized Bullfrog Spas dealer for replacing the pump.
What to do if your Bullfrog spa pump is not working?
The wet-end of the pump has a bleed valve—loosen this until all the air escapes and water starts to drip out, or loosen the union on the pump to let the air out until you see water. Do not attempt this while the spa pump is running. If you need help doing this or this does not resolve the problem, please contact your authorized Bullfrog Spa Dealer.
How to prevent airlocks in a bullfrog hot tub?
To prevent airlocks when filling your spa, be sure to open all valves in the JetPaks and all other jets in the spa before filling to allow as much air as possible to escape from the system during the filling process. Fill your spa through the filter by taking the filter cap off and put the hose directly in the filter.
What should water temp be in Bullfrog hot tub?
Open the cover for several minutes, long enough to allow the water to cool down. Repeat a couple times weekly as necessary. For safety reasons, never leave your spa unattended with the cover open. If OHH is displayed on the control panel, this means that the thermometer has detected spa water temperature above 110 degrees F.
What are the features of a bullfrog hot tub?
Bullfrog’s X Series of hot tubs is their value line consisting of more conventional spas – without their patented jetpaks. Features vary from spa to spa, but most have stainless steel jets, a continuous duty pump, a high performance spa pump, backlit waterfall, LED mood lighting and a hard cover.
What kind of spa pump does Bullfrog use?
See our Aquaflo XP2 and all AquaFlo replacement spa pumps (with Emerson motors) as used in select models in this series. Jetpacks are a collection of jets in one unit with monikers such as DeepRelief, FibroTherapy, Gyrossage and AcuTherapy. Jetpacks are also made for Stil Spas such as Wellness, RainShower and SpinalHealth.
If your spa pump is creating a burning smell or making excessive noise, the pump motor is defective. This can happen when running the pump during high ambient outside temperatures or due to excessive run times. Please contact your authorized Bullfrog Spas dealer for replacing the pump.
When to drain a bullfrog hot tub manifold?
If the leak is at a jet, manifold or in other areas of the plumbing, it is probably a good idea to drain the spa before doing any of the repairs to avoid a new frog swamp near the spa.
